MikroTik RouterBOARD 2011 (RB2011UiAS-2HnD)
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |
|---|---|
| RB2011UiAS-2HnD | |
|
| |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Was Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | MikroTik RouterBOARD 2011 |
| Model Part Number | RB2011UiAS-2HnD |
| FCC ID | none specified |
| Type | wireless router |
| CPU1 | Atheros AR9344 |
| CPU1 Type | MIPS 74Kc |
| CPU1 Speed | 600 MHz 32-bit |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Atheros AR9344 |
| Switch | Atheros AR8327 |
| Ethernet Port Count | 5-100MbE x 5-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | RouterBOOT |
| Expansion IF types | USB 2.0, USB OTG |
| USB ports | 2 |
| USB Hub Compatible | Untested |
| PoE | Passive |
| Power | 8-30 VDC, ? A |
| Serial Port (UART) | yes, (115200 8N1) |
| JTAG Port | yes |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt (Was) |
| Retail | |
| Availability | End of Life |
| Radio 1 | |
| Chip1 | Atheros AR9344 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented MikroTik devices with specifications, see MikroTik.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: ar71xx-ath79
OpenWrt Subtarget: mikrotik
OpenWrt Package architecture: mips_24kc
Support started version: 15.05
Current supported version: snapshot
OpenWrt Subtarget: mikrotik
OpenWrt Package architecture: mips_24kc
Support started version: 15.05
Current supported version: snapshot
LAN Comment: passive 24 V PoE out on port 10
Comment:
migrated from ar71xx target
Comment:
migrated from ar71xx target
Please insert instructions here
Categories:
- MikroTik
- Embedded system/wireless router
- Embedded System Atheros
- Embedded System AR9344
- Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System AR8327
- OpenWrt Was Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation