MikroTik RouterBOARD 435G (RB435G)
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Status Unknown |
| OpenWrt | Was Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | MikroTik RouterBOARD 435G |
| Model Part Number | RB435G |
| Type | single-board computer |
| CPU1 | Atheros AR7161 |
| CPU1 Type | MIPS 24K |
| CPU1 Speed | 680 MHz 32-bit |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) |
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Atheros AR7161 |
| Switch | Atheros AR8316 |
| Ethernet Port Count | 3-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader | RouterBOOT |
| Expansion IF types | microSD, USB 2.0 |
| USB ports | 1 |
| SD/MMC Slots | 1 |
| USB Hub Compatible | Untested |
| PoE | Passive |
| Power | 8-28 VDC, ? A |
| Connector type | barrel |
| Serial Port (UART) | yes, (115200 8N1) |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt (Was) |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented MikroTik devices with specifications, see MikroTik.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
OpenWrt Target: ar71xx
OpenWrt Subtarget: mikrotik
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 19.07.10
OpenWrt Subtarget: mikrotik
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 19.07.10
Please insert instructions here