MikroTik RouterBOARD RBSXT5nDr2 (SXT Lite 5)

From TechInfoDepot
Jump to navigationJump to search
an (N300)
Outdoor Access Point
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev MikroTik RouterBOARD RBSXT5nDr2 (SXT Lite 5)
FCC ID (fcc.io) TV7SXT-5ND
FCC ID (fcc.report) TV7SXT-5ND
Type access point
CPU1 checkY Atheros AR9344
CPU1 Type MIPS 74Kc
CPU1 Speed 560 MHz 32-bit
Flash1 Chip Brand? Model?
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 Atheros AR9344
Ethernet Port Count 1-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Stock bootloader RouterBOOT
Expansion IF types none specified
PoE Passive
Power 8-32 VDC, ? A
Serial Port (UART) yes, (115200 8N1)
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Availability End of Life
Radio 1
Chip1 Atheros AR9344
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented MikroTik devices with specifications, see MikroTik.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: mikrotik
Package architecture: mips_24kc
Supported Since Commit
Support started version: 17.01.0
Current supported version: 25.12.0
WLAN Hardware: Atheros AR9344
Installation method(s):
Mikrotik TFTP
git • >>
ar71xx: Add support for MikroTik RouterBOARD SXT Lite
This patch adds support for the MikroTik RouterBOARD SXT Lite.

The new RB911L series is also supported as a result.

v2 of this patch fixes the wmac offset to match what is on the sticker.
v3 refreshes the patch against r41148 and defines the power led as the status led in diag.sh
v4 refreshes the patch against r41353 and fixes the patch path issue to make git am work correctly
v5 selects the kernel config option in the mikrotik profile rather than in the main ar71xx config