MikroTik hEX PoE
From TechInfoDepot
Jump to navigationJump to search
| 5x Gigabit Ethernet with PoE output for four ports | |
 | |
| Homepage | Product page |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | MikroTik hEX PoE |
| Model Part Number | RB960PGS |
| Type | router |
CPU1  | Qualcomm Atheros QCA9557 |
| CPU1 Type | MIPS 74Kc |
| CPU1 Speed | 720 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI) |
| RAM1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Qualcomm Atheros QCA9557 |
| Switch | Qualcomm Atheros QCA9557 |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader | RouterBOOT |
| Expansion IF types | USB 2.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| PoE | Passive |
| Power | 12-57 VDC, ? A |
| Connector type | barrel |
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented MikroTik devices with specifications, see MikroTik.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: ath79
Subtarget: mikrotik
Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: 25.12.5
Subtarget: mikrotik
Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: 25.12.5
LAN Hardware: Qualcomm Atheros QCA9557
WLAN Hardware: 1x passive PoE in, 4x 802.3af/at PoE out
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
WLAN Hardware: 1x passive PoE in, 4x 802.3af/at PoE out
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
| git • >> |
|---|
ath79: add support for MikroTik RouterBOARD 960PGS This patch adds support for the MikroTik RouterBOARD 960PGS (hEX PoE/PowerBox Pro) router. The device has a USB 2.0 port and an SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Specifications: - SoC: Qualcomm Atheros QCA9557 - Flash: 16 MB (SPI) - RAM: 128 MB - 1x Ethernet SFP: 1000 - 1x Ethernet RJ45: 10/100/1000 port with passive POE in - 4x Ethernet RJ45: 10/100/1000 ports with 802.3af/at PoE out - 1x USB 2.0 host port - 1x reset button See [1] and [2] for more details. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Link: https://mikrotik.com/product/RB960PGS [1] Link: https://mikrotik.com/product/RB960PGS-PB [2] Signed-off-by: Oskari Lemmela Signed-off-by: Chester A. Unal |
