We're currently finishing up our MediaWiki 1.39 upgrade. MediaWiki is converting the format in which page content is stored behind the scenes - until this is done, you may see an error saying there is no text in your pages. Please be patient, this process is progressing as fast as it can, and your pages will be restored when it completes. Any further issues, don't hesitate to get in touch with our support team, or watch our Facebook page for the most up-to-date information.

MitraStar GPT-2541GNAC

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC2100)
4-port GPON Home Gateway Unit
Movistar HGU.png
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Status Unknown
Platform
BrandModelRev
MitraStar GPT-2541GNACVW-GV
Serial number prefix
MSTC2*******
FCC ID
Type
wireless router, fiber gateway
CPU1 checkY
Broadcom BCM68380
CPU1 Type
MIPS 74K
CPU1 Speed
600 MHz ( 2 cores )
CPU2 checkY
Quantenna QT3740BC
CPU2 Type
ARC 700
CPU2 Speed
500 MHz ( 2 cores )
Flash1 Chip
Macronix MX30LF1G18AC-TI x 1
Flash1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
Flash2 Chip
Macronix MX25L512EMI-10G
Flash2 Size
64 KiB 0.0625 MiB <br />65,536 B <br />512 Kib <br />0.5 Mib <br />6.103516e-5 GiB <br /> (SPI)
Flash2 Max Firmware Size
65536 bytes
RAM1 Size
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3 SDRAM 800)
RAM1 Chip
Samsung K4B2G1646Q-BCK0 x 1
RAM2 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (DDR3)
RAM2 Chip
ESMT M15F1G1664A-ADBG x 1
nvram Size
128K
ETH chip1
Broadcom BCM68380
Switch
Broadcom BCM68380
Ethernet Port Count
4-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: E0:41:36, 84:AA:9C, 98:97:D1 (1 E, 1 W)
Ethernet OUI: E0:41:36, 84:AA:9C, 98:97:D1 (1 E, 1 W)

boot_wait
On
Stock bootloader
CFE 1.0.41-117.134 BCM96838
Stock FW OS
Linux 3.4.11 -rt19+
Expansion IF types
USB 2.0
USB ports
2
USB Hub Compatible
Untested
Power
12 VDC, 2 A
Connector type
barrel
Serial Port (UART)
Yes
JTAG Port
No
Flags:
GPON, VoIP

Additional chips
FXS Single SLIC;Microsemi;Le9541;;1;

Other

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1335 additional devices
of which 0 are MitraStar devices
Default login user: 1234 or user
Default login password: On the back of the router
1234 or user:On the back of the router credentials used by 1 additional devices
of which 0 are MitraStar devices

Default Channel(s)
Automatic
Manuf/OEM/ODM
Retail
FCC approval date 27 January 2016
Country of manuf China
Buttons
Power On/Off, Wi-Fi 2.4G On/Off/WPS, Wi-Fi 5G On/Off/WPS, Reset
Radio 1
Chip1
Quantenna QT3740BC
Chip2
Quantenna QT2518B
Wireless interface OUI
E0:41:36, 84:AA:9C, 98:97:D1
Antenna Connector Type
U.FL
MIMO status
4x4:4
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 1733 Mbps
802.11n
up to 600 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
Radio 2
Chip1
Broadcom BCM43217T
Wireless interface OUI
E0:41:36, 84:AA:9C, 98:97:D1
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.

For a list of all currently documented MitraStar devices with specifications, see MitraStar.

1733 Mbps - 4SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC2100 class

Overview

Specifications

HW Interface:
  • WAN: One Giga optical interface (SC/APC)
  • LAN: Four 10/100/1000 RJ-45 interfaces
  • WLAN: Two 2x2 2.4GHz external antenna,
Three 3x3 5GHz internal antenna
  • FXS: POTS port for 2 FXS
  • USB: Two USB 2.0 Host ports
  • LED indicators: Power, PON, Internet, Ethernet,
Wireless 2.4GHz, Wireless 5GHz, USB, VoIP
  • Power supply: 12V DC, 2A

For accessing a complete shell in SSH, will be needed to specify the default user and password of the router and the first command should be /bin/sh. For example, in unix like systems the command would be ssh 1234@192.168.1.1 /bin/sh. Also, for activating and deactivating remote management services like http and ssh, it can be done by the page http://192.168.1.1/remoteMGMT.html