NAG SNR-CPE-ME2-Lite

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1200)
Wi-Fi 5 Wireless Gigabit Router
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev NAG SNR-CPE-ME2-Lite
FCC ID none specified
Type CPE, wireless router
CPU1 checkY MediaTek MT7621A
CPU1 Type MIPS 1004Kc
CPU1 Speed 880 MHz ( 2 cores ) 16-bit
Flash1 Chip Brand? Model?
Flash1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 MediaTek MT7621A
Switch MediaTek MT7621A
Ethernet Port Count 1-1GbE-WAN
4-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types none specified
Power 12 VDC, 1 A
Connector type barrel
Serial Port (UART) yes, 3.3V TTL, (57600 8N1)
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 MediaTek MT7603E
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7613BE
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
NAG SNR-CPE-AX2 v1MediaTekMediaTekMediaTek
NAG SNR-CPE-MD1MediaTekMediaTekMediaTek
NAG SNR-CPE-ME1MediaTekMediaTekMediaTek
NAG SNR-CPE-ME2-LiteMediaTekMediaTekMediaTek
NAG SNR-CPE-ME2-SFPMediaTekMediaTekMediaTek
NAG SNR-CPE-W4NRalinkRalink
NAG SNR-CPE-W4N (rev.M)MediaTekMediaTek
NAG SNR-CPE-W4N-3GRalinkRalink

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),
• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC1200 class

Flashing

Flashing OpenWrt

Target: ramips
Subtarget: mt7621
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.2
Unsupported Functions:
DFS
LAN Hardware: MediaTek MT7621A
WLAN Hardware: MediaTek MT7603E, MediaTek MT7613BE
WLAN Comment: 2.4GHz 2T2R and 5GHz 2T2R
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >> 
ramips: add support for SNR SNR-CPE-ME2-Lite
SNR SNR-CPE-ME2-Lite is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A.

Specification:
    - SoC           : MediaTek MT7621A
    - RAM           : DDR3 128 MiB
    - Flash         : SPI-NOR 16 MiB
    - WLAN          : 2.4 GHz 2T2R (MediaTek MT7603E)
                      5 GHz 2T2R (MediaTek MT7613BE)
    - Ethernet      : 10/100/1000 Mbps x5
      - Switch      : MediaTek MT7530 (SoC)
    - UART          : through-hole on PCB
      - J4: 3.3V, GND, TX, RX
      - 57600n8
    - Power         : 12 VDC, 1.5 A

Flash instruction via WEB (firmware 1.10.4 and later)
    1. Boot SNR-CPE-ME2-Lite normally with "Router" mode
    2. Access to "http://192.168.1.1/" and open "Administration -> Management" page
    3. Select the OpenWrt factory image in "Firmware update" section and click "Update" button
    4. Wait ~120 seconds to complete flashing

Flash instruction via TFTP (all version):
    1. Boot SNR-CPE-ME2-Lite to recovery mode (hold the reset button while power on)
    2. Send firmware via TFTP client:
       TFTP Server address: 192.168.1.1
       TFTP Client address: 192.168.1.131
    3. Wait ~120 seconds to complete flashing
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=NAG_SNR-CPE-ME2-Lite&oldid=539077"