Netgear EX6250

From TechInfoDepot
(Redirected from NETGEAR EX6250 v1)
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1750)
AC1750 WiFi Mesh Extender
Homepage Product page
Support Support page
Wikipedia Netgear
WikiDevi.wi-cat.ru Netgear EX6250
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Partial Support
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Netgear EX6250 v1
FCC ID PY318400431
Board ID 29765907
Type range extender, mesh node
CPU1 checkY Qualcomm QCN5502
CPU1 Type MIPS 74Kc
CPU1 Speed 775 MHz
Flash1 Chip Winbond Model?
Flash1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip Winbond W971GG6SB25J
ETH chip1 Qualcomm QCN5502
ETH chip2 Atheros AR8033
Ethernet Port Count 1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader U-Boot
Stock FW OS Linux 3.3.8 OpenWrt-derived
Expansion IF types none specified
Power 100-240 VAC ~ 50/60 Hz, 0.5 A
Connector type AC (direct)
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)

Flags:
DFS (master), DFS (slave)

Additional chips
5GHz FEM;Skyworks;;SKY11, 8577?, ??????;3;

Other
Manuf/OEM/ODM Delta Networks
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 27 December 2018
(Est.) initial retail price (in USD): $120
ASIN B07MDZ8G4T
Country of manuf China
Radio 1
Chip1 Qualcomm QCN5502
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 3x3:3
Wireless Standard IEEE 802.11b/g/n
802.11n up to 450 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm Atheros QCA9986
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 3x3:3
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 1300 Mbps
802.11n up to 450 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Netgear EX6250QualcommQualcommQualcomm Atheros
Netgear EX6250 v2MediaTekMediaTekMediaTek

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Netgear devices with specifications, see Netgear.

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.),
• 1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.) = AC1750 class

Overview

Not much is currently known about the QCA9986 radio or the QCN5502 CPU in this device. It is possible that the QCN5502 is serving the 5GHz an+ac while the QCA9986 provides 2.4GHz bgn. The Skyworks FEMs appear to be a SKY85773-11 model but no such model is mentioned on the Skyworks website. The FEMs are clearly connected to the QCA9986 radio.

Test Report documents suggest that this device actually supports 600Mbps 2.4GHz 802.11n with 64-QAM and 1733Mbps 5GHz 802.11ac which would mean that it supports four spatial streams in both radios and could be considered an AC2300-class device. Internal photos show only three spatial streams implemented for the 5GHz radio with an unpopulated spot for a fourth 5GHz FEM. The 2.4GHz circuits are tougher to trace but also appear to only implement three spatial streams with unpopulated spots for a fourth. This suggests that the design is shared with another four-stream model.

The firmware provided for download suggests that this device is related to the four-stream Netgear EX7300v2:

  • "device: EX7300v2 series
version: V1.0.0.80
region: 0x0a
hd_id: 29765907+16+0+128"

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 22.03.0
Current supported version: 25.12.2
Unsupported Functions:
WiFi 2.4GHz
LAN Comment: Atheros AR8033 GbE Phy
WLAN Hardware: Qualcomm QCN5502, Qualcomm Atheros QCA9986
WLAN Comment: MIMO 3x3:3 2.4Ghz, MIMO 3x3:3 5Ghz
Installation method(s):
GUI OEM, U-Boot TFTP recovery, see git-commit
Recovery method(s):
U-Boot TFTP recovery
Comment:
https://github.com/openwrt/openwrt/pull/9389
git • >>
ath79: add partial support for Netgear EX7300v2
Hardware
--------
SoC: QCN5502
Flash: 16 MiB
RAM: 128 MiB
Ethernet: 1 gigabit port
Wireless No1: QCN5502 on-chip 2.4GHz 4x4
Wireless No2: QCA9984 pcie 5GHz 4x4
USB: none

Installation
------------
Flash the factory image using the stock web interface or TFTP the
factory image to the bootloader.

What works
----------
- LEDs
- Ethernet port
- 5GHz wifi (QCA9984 pcie)

What doesn't work
-----------------
- 2.4GHz wifi (QCN5502 on-chip)
  (I was not able to make this work, probably because ath9k requires
  some changes to support QCN5502.)