NXP Freeway Development Board
| abgn+ac (AC600) | |
|---|---|
| Layerscape FRWY-LS1012A Board | |
|
| |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | NXP FRWY-LS1012A-PA |
| FCC ID (fcc.io) | none specified |
| FCC ID (fcc.report) | none specified |
| Type | development board |
| CPU1 | NXP LS1012A |
| CPU1 Type | ARM Cortex-A72 |
| CPU1 Speed | 1.0 GHz |
| Flash1 Chip | Winbond W25M161AWEIT |
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND (QSPI)) |
| Flash2 Chip | Winbond W25M161AWEIT |
| Flash2 Size | 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| Flash3 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (NOR) |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3L SDRAM) |
| RAM1 Chip | Kingston D2516ECMDXGJD |
| ETH chip1 | NXP LS1012A |
| ETH chip2 | Atheros AR8033 |
| ETH chip3 | Atheros AR8033 |
| Ethernet Port Count | 2-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
| Stock bootloader | U-Boot 2017.07 |
| Stock FW OS | Linux 4.9.62 Ubuntu 16.04 |
| Expansion IF types | SD/SDHC/MMC card, USB 3.0, M.2 (NGFF), MikroBus, Micro SD Card slot |
| USB ports | 1 |
| SD/MMC Slots | 1 |
| M.2 Slots | 1 |
| USB Hub Compatible | Untested |
| Power | 5 VDC, 4 A |
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) | yes, USB Female (Micro-B), console, 5V TTL, (115200 8N1) |
| JTAG Port | yes, 10-pin header, populated, J9 |
|
Flags: | |
|
Additional chips | |
| Other | |
|
Default IP address: 192.168.99.1 | |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| (Est.) release date | March 2018 |
| Country of manuf | China |
| Radio 1 | |
| Radio1 module | Qualcomm Atheros QCNFA435 |
| Radio1 module IF | M.2 (NGFF) |
| Chip1 | Qualcomm Atheros QCA9377 |
| Wireless interface OUI | C8:FF:28 |
| Antenna Connector Type | MHF4 |
| MIMO status | 1x1:1 |
| Wireless Standard | IEEE 802.11a/b/g/n/ac |
| 802.11ac | up to 433 Mbps |
| 802.11n | up to 150/150 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 2.4 or 5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented NXP devices with specifications, see NXP.
Overview
Hardware specification
- CPU: NXP LS1012A @1.0GHz
- Single-core ARM (Cortex-A53)
- Memory: 512MB (DDR3L) SDRAM
- Storage: 16MB (NOR) 128MB NAND (QSPI) Flash,
- SD/SDHC/MMC card (max.32GB) slot
- USB: 1x USB 3.0 OTG port
- Network: 2x Gigabit Ethernet
- Expansion: 1x mikroBUS Click connector
- Power Source: DC Jack 5V, 4A
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_generic
Support started version: 19.07.0
Current supported version: 24.10.4
WLAN Hardware: none
Comment:
mikroBUS Click expansion connector
Please insert instructions here
Pictures
- NXP
- Embedded system/development board
- Embedded System NXP
- Embedded System LS1012A
- Embedded System ARM
- Embedded System Cortex-A72
- Embedded System AR8033
- Embedded System Atheros
- Atheros
- OpenWrt Supported
- Embedded System Qualcomm Atheros
- Embedded System QCA9377
- Qualcomm Atheros
- Has Mimo Status
- Embedded System IEEE 802.11a/b/g/n/ac
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation