NXP LS1021A-IOT
Gateway Reference Design | |
Homepage | |
---|---|
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
TechNexion LS1021A-IOT REV X2 |
Type |
IoT Gateway |
CPU1 |
NXP LS1021A |
CPU1 Type |
ARM Cortex-A7 |
CPU1 Speed |
1.0 GHz ( 2 cores ) |
CPU2 |
Freescale MK22FX512 |
CPU2 Speed |
120 MHz |
Flash1 Chip |
Spansion S70FL01GSAIF01 |
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (QSPI NOR) |
Flash2 Chip |
Freescale MK22FX512 |
Flash2 Size |
1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> |
RAM1 Size |
1.5 GiB 1,536 MiB <br />1,610,612,736 B <br />12,582,912 Kib <br />1,572,864 KiB <br />12,288 Mib <br /> (DDR3L SDRAM) |
RAM1 Chip |
Micron MT41K256M16HA-125:E x 3 |
RAM2 Size |
128 KiB 0.125 MiB <br />131,072 B <br />1,024 Kib <br />1 Mib <br />1.220703e-4 GiB <br /> |
RAM2 Chip |
Freescale MK22FX512 |
ETH chip1 |
NXP LS1021A |
ETH chip2 |
Atheros AR8033 |
ETH chip3 |
Atheros AR8033 |
Switch |
Realtek RTL8365MB |
Ethernet Port Count |
2-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
Stock bootloader |
U-Boot |
Stock FW OS |
Linux 4.4.50 LEDE 17.01 |
Expansion IF types |
SD/SDHC /MMC Card slot, USB 3.0, SATA 3.0, Mini PCIe |
Mini PCIe slots |
2 |
USB ports |
2 |
SD/MMC Slots |
1 |
SATA Ports |
1 |
USB Hub Compatible |
Untested |
PoE |
802.3af, standard |
Power |
12 VDC, 5 A |
Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
Serial Port (UART) |
yes, USB Female Mini-B, (115200 8N1), |
JTAG Port |
yes, 10-pin header, populated, J21 |
Flags: HDMI, Audio in (3.5mm), Audio out (3.5mm), Arduino expansion, CAN Bus, I2C, SPI, UART, GPIO, RTC w/ battery, fan, heatsink, metal case | |
Additional chips | |
Other | |
Default IP address: 192.168.1.1 | |
Manuf/OEM/ODM |
TechNexion |
3rd Party Firmware Support | |
Retail | |
(Est.) release date | October 2014 |
(Est.) initial retail price (in USD): | $429 |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
SATA 3.0 is muxed with Eth1
JTAG is available for both processors and the CPLD.
Hardware specification
- CPU: NXP LS1021A @1.0GHz
- Duad-core ARM (Cortex-A7)
- Memory: 1.5GB (DDR3L) SDRAM
- Storage: 128MB (QSPI NOR) Flash, SATA 3.0,
- SD/SDHC/MMC card (max.32GB) slot
- USB: 2x USB 3.0 ports
- Network: 6x Gigabit Ethernet (2x WAN, 4x LAN)
- Power Source: DC Jack 12V, 5A or 802.3af PoE via Eth3
Links of Interest
- Freescale LS1021A-IOT IoT Gateway Reference Design on CNX-Soft
- IoT gateway runs Linux on QorIQ, accepts Arduino Shields on LinuxGizmos
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: layerscape
OpenWrt Subtarget: armv7
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 19.07.0
Current supported version: 23.05.5
Please insert instructions here
- TechNexion
- Embedded system/IoT Gateway
- Embedded System NXP
- Embedded System LS1021A
- NXP
- Embedded System ARM
- Embedded System Cortex-A7
- Embedded System Freescale
- Embedded System MK22FX512
- Freescale
- Embedded System AR8033
- Embedded System Atheros
- Atheros
- Embedded System Realtek
- Embedded System RTL8365MB
- Realtek
- Manuf TechNexion
- OpenWrt Supported
- Wired Embedded System
- Embedded System
- English Documentation