NXP TWR-LS1021A
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
 | |
| Homepage | Product page |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | NXP TWR-LS1021A |
| Type | single-board computer |
CPU1  | NXP LS1021A |
| CPU1 Type | ARM Cortex-A7 |
| CPU1 Speed | 1.2 GHz ( 2 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| Flash2 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | NXP LS1021A |
| Switch | NXP LS1021A |
| Ethernet Port Count | 3-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader | U-Boot |
| Expansion IF types | Mini PCIe, USB 3.0, SATA |
| Mini PCIe slots | 2 |
| USB ports | 2 |
| SATA Ports | 1 |
| USB Hub Compatible | Untested |
| Power | 5 VDC, 5 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 5V TTL, (115200 8N1) |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.
For a list of all currently documented NXP devices with specifications, see NXP.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: layerscape
Subtarget: armv7
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 19.07.0
Current supported version: 25.12.5
Subtarget: armv7
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 19.07.0
Current supported version: 25.12.5
WLAN Comment: WLAN dependent on mPCIe cards installed
Installation method(s):
SD card
Installation method(s):
SD card
| git • >> |
|---|
layerscape: add armv7 subtarget and ls1021atwr board support The NXP TWR-LS1021A module is a development system based on the QorIQ LS1021A processor. - This feature-rich, high-performance processor module can be used standalone or as part of an assembled Tower System development platform. - Incorporating dual Arm Cortex-A7 cores running up to 1 GHz, the TWR-LS1021A delivers an outstanding level of performance. - The TWR-LS1021A offers HDMI, SATA3 and USB3 connectors as well as a complete Linux software developer's package. - The module provides a comprehensive level of security that includes support for secure boot, Trust Architecture and tamper detection in both standby and active power modes, safeguarding the device from manufacture to deployment. Signed-off-by: Yangbo Lu |
