NanoPi K1 Plus

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N150)
Single-board Computer
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
Brand • Model • Rev
FriendlyARM NanoPi K1 Plus
FCC ID
none specified
Type
single-board computer
CPU1
Allwinner H5
CPU1 Type
ARMv8-A Cortex-A53
CPU1 Speed
1.3 GHz ( 4 cores )
Flash1 Chip
Brand? Model?
Flash1 Size
0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br />
RAM1 Size
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br />
RAM1 Chip
Samsung K4B4G16460-BCK0 x 4
ETH chip1
Allwinner H5
ETH chip2
Realtek RTL8211E
Ethernet Port Count
1-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader
U-Boot 2017.11
Stock FW OS
Linux 4.14.111 FriendlyCore (UbuntuCore 16.04)
Expansion IF types
USB 2.0, eMMC module socket
USB ports
3
USB Hub Compatible
Untested
Power
5 VDC, 2 A
Connector type
USB 2.0 Female Micro-B
Serial Port (UART)
yes, 4-pin header, 3.3V TTL, (115200 8N1)
Flags:
HDMI 1.4, Micro SD Card slot, DVP Camera Interface, CVBS header, Microphone, IR receiver, I2S, I2C, GPIO

Additional chips
3-pin Microprocessor Reset Circuit;ON Semi;NCP803;;1;
1A, 1.5MHz PWM Step-Down DC/DC Converter;Richtek;RT8059;;2;
2.5A, 1MHz Synchronous Step-Down Regulator; Silergy Corp;SY8032;;1;
6A, 18V I2C Programmable Voltage Regulator;Silergy;SY8106A;;1;
5.5V, 2A Low Loss Power Distribution Switch;Silergy;SY6280;;1;
300mA CMOS LDO Regulator;Richtek;RT9193;;1;

Other

Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 211 additional devices
of which 13 are FriendlyARM devices
Default login user: root
Default login password: fa
root:fa credentials used by 2 additional devices
of which 2 are FriendlyARM devices

3rd Party Firmware Support
Android 7, FriendlyWrt, Armbian, DietPi
Retail
(Est.) release date April 2018
(Est.) initial retail price (in USD): $35
Country of manuf China
Radio 1
Radio1 module
unknown
Radio1 module IF
SDIO 3.0
Chip1
Realtek RTL8189ETV
Wireless interface OUI
none specified
Antenna Connector Type
integrated
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
NanoPi K1 PlusAllwinnerRealtek
NanoPi K2AmlogicBroadcom

For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented FriendlyARM device with specifications, see FriendlyARM.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

See also: NanoPi series and List of Single-board computers

Specifications

  • CPU: Allwinner H5 @1.3GHz (Quad-core Cortex-A53)
  • GPU: Mali-450MP4 @600MHz (H.265/HEVC 4K)
  • Memory: 2GB (DDR3) SDRAM (Samsung K4B4G16460-BCK0 ×4)
  • Onboard Storage: TF card (max. 128GB)/MMC card slot, eMMC module socket
  • Ports: 1x GbE LAN, 3x USB 2.0 ports

Links of Interest

Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=NanoPi_K1_Plus&oldid=390774"