NanoPi M1

multiple revisions of this device, use caution

Single-board Computer
Support	Support page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	FriendlyARM NanoPi M1 (512MB)
Type	single-board computer
CPU1	Allwinner H3
CPU1 Type	ARMv7-A Cortex-A7
CPU1 Speed	1.2 GHz ( 4 cores )
Flash1 Chip	Brand? Model?
Flash1 Size	0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br />
RAM1 Size	512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3 SDRAM)
RAM1 Chip	Samsung K4B2G1646Q-BCK0
ETH chip1	Allwinner H3
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
Stock bootloader	U-Boot 2017.11
Stock FW OS	Linux 4.14.111 FriendlyCore (UbuntuCore 20.04 LTS)
Expansion IF types	USB 2.0, Micro SD Card slot
USB ports	3
SD/MMC Slots	1
USB Hub Compatible	Untested
Power	5 VDC, 2 A
Connector type	USB Female Micro-B
Serial Port (UART)	yes, 4-pin header, populated, 3.3V TTL, (115200 8N1)
Flags: HDMI 1.4, Micro SD Card slot, CVBS header, IR receiver, DVP Camera Interface, microphone, GPIO, SPI, I2C
Additional chips 1A 1.5MHz Synchronous Step-Down Regulator;Silergy;SY8008B;;1; 2A 1MHz Synchronous Step-Down Regulator; Silergy;SY8089A;;2; 3A 500KHz Synchronous Step Down Regulator;Silergy;SY8113B;;1; 5.5V 2A Low Loss Power Distribution Switch;Silergy;SY6280;;1;
Other
Default IP address: acquired via DHCP the IP acquired via DHCP is used by 213 additional devices of which 13 are FriendlyARM devices Default login user: pi Default login password: pi pi:pi credentials used by 7 additional devices of which 7 are FriendlyARM devices
Manuf/OEM/ODM	FriendlyARM
3rd Party Firmware Support	FriendlyWrt, Debian , Armbian, DietPi
Retail
(Est.) release date	March 2016
(Est.) initial retail price (in USD):	$11
Country of manuf	China
CPU1 brand FLA1 RAM1 NanoPi M1 Allwinner 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> NanoPi M1 Plus Allwinner 8,192 MiB8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br />8 GiB <br /> 1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br />

For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.

For a list of all currently documented FriendlyARM device with specifications, see FriendlyARM.

Overview

"FRIENDLYARM", "NanoPi M1" and "1603B" are silkscreened between the RAM chips.

Hardware specification

• CPU: Allwinner H3 (Quad-Core ARM Cortex-A7) @1.2 GHz
• GPU: Mali-400MP2 @600MHz (OpenGL ES 2.0, OpenVG 1.1)
• Memory: 512MB (DDR3) SDRAM • Samsung K4B2G1646Q
• Onboard Storage: TF card (64GB)/MMC card slot
• Ports: 1x FE LAN, 3x USB 2.0 ports, 1x microUSB OTG

Links of Interest

• FriendlyARM NanoPi M1 on SunXi • NanoPi M1 • NanoPi M1 Plus
• NanoPi M1 Allwinner H3 Development Board on CNX|Software
• Quad-core $11 hacker SBC runs Linux on Allwinner H3 on LinuxGizmos

Pictures

User Images

• 

  Board Top

• 

  Board Bottom