Netcraze Buddy 6 (NC-3411)
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac+ax (AX3000) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mesh-relayer Wi-Fi 6 AX3000 | |||||||||||||
|
| |||||||||||||
| Homepage | Product page | ||||||||||||
| 3rd Party Firmware | |||||||||||||
| dd-wrt | Status Unknown | ||||||||||||
| OpenWrt | Supported | ||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||
| Gargoyle | Status Unknown | ||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev | Netcraze Buddy 6 | ||||||||||||
| Model Part Number | NC-3411 | ||||||||||||
| FCC ID | none specified | ||||||||||||
| Type | range extender | ||||||||||||
| CPU1 | MediaTek MT7981B | ||||||||||||
| CPU1 Type | ARM Cortex-A53 | ||||||||||||
| CPU1 Speed | 1.3 GHz ( 2 cores ) 64-bit | ||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||
| Flash1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND) | ||||||||||||
| RAM1 Size | 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> | ||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||
| ETH chip1 | MediaTek MT7981B | ||||||||||||
| Ethernet Port Count | 1-1GbE-LAN | ||||||||||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||||||||||
|
802dot11 OUI: none specified | |||||||||||||
| Stock bootloader | U-Boot | ||||||||||||
| Expansion IF types | none specified | ||||||||||||
| Power | 100–240"–240" can not be assigned to a declared number type with value 100. VAC ~ ? Hz, ? A | ||||||||||||
| Connector type | AC | ||||||||||||
| Serial Port (UART) | yes, (115200 8N1) | ||||||||||||
|
| |||||||||||||
|
| |||||||||||||
| Other | |||||||||||||
|
| |||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 | MediaTek MT7981B | ||||||||||||
| Wireless interface OUI | none specified | ||||||||||||
| Antenna Connector Type | none specified | ||||||||||||
| MIMO status | 2x3:2 | ||||||||||||
| Wireless Standard | IEEE 802.11b/g/n/ax | ||||||||||||
| 802.11ax | up to 574 Mbps | ||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||
| Radio 2 | |||||||||||||
| Chip1 | MediaTek MT7981B | ||||||||||||
| Wireless interface OUI | none specified | ||||||||||||
| Antenna Connector Type | none specified | ||||||||||||
| MIMO status | 2x3:2 | ||||||||||||
| Wireless Standard | IEEE 802.11a/n/ac/ax | ||||||||||||
| AX-QAM | up to 2402 Mbps | ||||||||||||
| 802.11ax | up to 1201 Mbps | ||||||||||||
| 802.11ac | up to 867 Mbps | ||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||
| 802.11a | up to 54 Mbps | ||||||||||||
| WiFi Operating Frequency | 5 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
WLAN Hardware: MediaTek MT7981B
WLAN Comment: 2T2R on both bands
Installation method(s):
see git-commit
Install Comment:
Vendor TFTP recovery: server 192.168.1.2, image renamed to NC-3411_recovery.bin, hold Reset at power-on
Recovery method(s):
see git-commit
Recovery Comment:
Same TFTP recovery with the .bin from the official recovery package
Comment:
Same board as the Keenetic KN-3411 (Buddy 6); images are separate because the stock recovery checks brand and model
WLAN Comment: 2T2R on both bands
Installation method(s):
see git-commit
Install Comment:
Vendor TFTP recovery: server 192.168.1.2, image renamed to NC-3411_recovery.bin, hold Reset at power-on
Recovery method(s):
see git-commit
Recovery Comment:
Same TFTP recovery with the .bin from the official recovery package
Comment:
Same board as the Keenetic KN-3411 (Buddy 6); images are separate because the stock recovery checks brand and model
| git • >> |
|---|
mediatek: filogic: add support for Netcraze NC-3411 (Buddy 6) The Netcraze NC-3411 is a rebrand of the Keenetic KN-3411 (Buddy 6) with identical hardware. The stock recovery accepts only images signed with the NC-3411 zyimage device id, taken here from the signature of the official NC-3411 firmware. Split the KN-3411 device tree into a common .dtsi with per-brand model/compatible files and share one image recipe through a common device define, following the existing KN-1812/NC-1812 pattern. Signed-off-by: Aleksei Sviridkin Link: https://github.com/openwrt/openwrt/pull/23727 Signed-off-by: Jonas Jelonek |
Categories:
- Netcraze
- Embedded system/range extender
- Embedded System MediaTek
- Embedded System MT7981B
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A53
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation
- New Entry