Netcraze NC-1012

abgn+ac+ax (AX3000)
Mesh Wi-Fi 6 AX3000
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Netcraze NC-1012
FCC ID	none specified
Type	wireless router
CPU1 Y	MediaTek MT7981B
CPU1 Type	ARM Cortex-A53
CPU1 Speed	1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip	Brand? Model?
Flash1 Size	256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND)
RAM1 Size	512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
RAM1 Chip	Brand? Model?
ETH chip1	MediaTek MT7981B
Switch	MediaTek MT7531
Ethernet Port Count	1-2.5GbE-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab/3bz
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	SFP
SFP ports	1
Power	12 VDC, 2.5 A
Serial Port (UART)	yes, (115200 8N1)
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Radio 1
Chip1	MediaTek MT7981B
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x3:2
Wireless Standard	IEEE 802.11b/g/n/ax
802.11ax	up to 574 Mbps
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7981B
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x3:2
Wireless Standard	IEEE 802.11a/n/ac/ax
AX-QAM	up to 2402 Mbps
802.11ax	up to 1201 Mbps
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),

• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot

Unsupported Functions:
Copper side of the combo port (lan4 RJ45) until a pending kernel fix is merged
LAN Hardware: MediaTek MT7531
LAN Comment: lan4 is a combo port: RJ45 through an Airoha EN8811H 2.5G PHY or an SFP cage, one at a time, chosen at boot by whether a module is present
WLAN Hardware: MediaTek MT7981B
WLAN Comment: 2T2R on both bands
Installation method(s):
see git-commit
Install Comment:
Vendor TFTP recovery: server 192.168.1.2 on a LAN port, image renamed to NC-1012_recovery.bin, hold Reset at power-on
Recovery method(s):
see git-commit
Recovery Comment:
Same TFTP recovery with the .bin from the official recovery package
Comment:
Rebrand of the Keenetic KN-1012 with identical hardware; images are separate because the stock recovery checks the brand

git • >>

mediatek: filogic: add support for Netcraze NC-1012 The Netcraze NC-1012 is a rebrand of the Keenetic KN-1012 with identical hardware. The stock recovery accepts only images signed with the NC-1012 zyimage device id, taken here from the official NC-1012 recovery image. It shares the KN-1012 device tree through the common dtsi and the copper and SFP overlays, and the image recipe through the common device define, following the KN-3411/NC-3411 pattern. The recovery procedure is the KN-1012 one with the image named NC-1012_recovery.bin. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin Link: https://github.com/openwrt/openwrt/pull/24820 Signed-off-by: Jonas Jelonek