Netgear EX6400v2

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1900)
AC1900 Wi-Fi Mesh Extender
Homepage Product page
Support Support page
Wikipedia Netgear
WikiDevi.wi-cat.ru Netgear EX6400v2
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Partial Support
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev Netgear EX6400 v2
FCC ID PY318300422
IC ID 4054A-18300422
Type range extender, mesh node
CPU1 checkY Qualcomm QCN5502
CPU1 Type MIPS 74Kc
CPU1 Speed 800 MHz
Flash1 Chip Winbond Model?
Flash1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip Winbond Model?
ETH chip1 Qualcomm QCN5502
ETH chip2 Atheros AR8033
Ethernet Port Count 1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types none specified
Power 100-240 VAC ~ 50/60 Hz, 0.5 A
Connector type AC (direct)
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)

Flags:
Wave2, MU-MIMO

Other
Manuf/OEM/ODM Delta Networks
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 20 January 2019
Country of manuf China
Radio 1
Chip1 Qualcomm QCN5502
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11b/g/n
802.11n up to 600 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm Atheros QCA9984
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 3x3:3
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 1300 Mbps
802.11n up to 450 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 FCC ID
Netgear EX6410PY318300422
Netgear EX6420PY318300422
Netgear EX7300v2PY318300422
Netgear EX7320PY318300422
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Netgear EX6400Qualcomm AtherosQualcomm AtherosQualcomm Atheros
Netgear EX6400v2QualcommQualcommQualcomm Atheros
Netgear EX6400v3MediaTekMediaTekMediaTek

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Netgear devices with specifications, see Netgear.

600 Mbps - 3SS 2.4GHz 802.11n (40MHz chan., 256-QAM),
1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.) = AC1900 class

Overview

FCC documents for the Netgear EX7300v2 also list this Netgear EX6400v2 and explain the differences as follows,

"The listed models are electrically and mechanically identical. The intention of these models is only for RF output transmit antenna (EX7300v2 5G: 4T4R; EX6400v2 5G: 3T3R) and different NETGEAR logo (EX7300v2 has silver coating. EX6400v2 has no silver coating) purpose."

Despite retaining the AC1900 label of the first Netgear EX6400 in its marketing material, FCC documents suggest that the Netgear EX6400v2 can now support 450 Mbps for 2.4GHz 802.11n due to its three spatial streams. There was a lot of confusion about where the AC1900 rating came from for the v1 anyways.


This device was under short-term confidentiality, but that expired 07/20/2019 ⚠.

Web GUI: www.mywifiext.net

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 22.03.0
Current supported version: fix
Unsupported Functions:
WiFi 2.4GHz
LAN Comment: Atheros AR8033 GbE Phy
WLAN Hardware: Qualcomm QCN5502, Qualcomm Atheros QCA9984
WLAN Comment: MIMO 3x3:3 2.4Ghz, MIMO 4x4:4 5Ghz
Installation method(s):
GUI OEM, U-Boot TFTP recovery, see git-commit
Recovery method(s):
U-Boot TFTP recovery
Comment:
https://github.com/openwrt/openwrt/pull/9389
git • >>
ath79: add partial support for Netgear EX7300v2
Hardware
--------
SoC: QCN5502
Flash: 16 MiB
RAM: 128 MiB
Ethernet: 1 gigabit port
Wireless No1: QCN5502 on-chip 2.4GHz 4x4
Wireless No2: QCA9984 pcie 5GHz 4x4
USB: none

Installation
------------
Flash the factory image using the stock web interface or TFTP the
factory image to the bootloader.

What works
----------
- LEDs
- Ethernet port
- 5GHz wifi (QCA9984 pcie)

What doesn't work
-----------------
- 2.4GHz wifi (QCN5502 on-chip)
  (I was not able to make this work, probably because ath9k requires
  some changes to support QCN5502.)