Netgear R7300DST
| abgn+ac (AC1900) | |
|---|---|
| AC1900 Nighthawk DST Router & DST Adapter | |
|
| |
| Support | Support page |
| Wikipedia | Netgear |
| WikiDevi.wi-cat.ru | Netgear R7300DST |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Status Unknown |
| Platform | |
| Brand • Model • Rev | Netgear R7300DST |
| FCC ID (fcc.io) | PY315200307 |
| FCC ID (fcc.report) | PY315200307 |
| IC ID | 4054A-15200307 |
| Type | wireless router, Powerline Access Point |
| CPU1 | Broadcom BCM4709A0 |
| CPU1 Type | ARMv7 Cortex-A9 |
| CPU1 Speed | 1.0 GHz ( 2 cores ) |
| CPU2 | Broadcom BCM60335 |
| Flash1 Chip | Spansion S34ML01G200TFI00 |
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip | Samsung K4B2G1646Q-BCK0 |
| ETH chip1 | Broadcom BCM4709A0 |
| ETH chip2 | Broadcom BCM54612E |
| Switch | Broadcom BCM4709A0 |
| Ethernet Port Count |
1-WAN 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader | CFE |
| Stock FW OS | Linux |
| Expansion IF types | USB 3.0, USB 2.0 |
| USB ports | 2 |
| USB Hub Compatible | Untested |
| Power | 100-240 VAC ~ 50/60 Hz, 1.3 A |
| Connector type | AC (direct) |
| Serial Port (UART) | yes, internal, 4-pin header, 3.3V TTL |
|
Flags: | |
|
Additional chips | |
| Other | |
|
Default IP address: http://www.routerlogin.net | |
| Manuf/OEM/ODM | Foxconn U12H270 T00 |
| Retail | |
| FCC approval date | 19 August 2015 |
| ASIN |
B01HB56E5G |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | Broadcom BCM4360 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL, RP-SMA |
| MIMO status | 3x3:3 |
| Wireless Standard | IEEE 802.11a/n/ac |
| 802.11ac | up to 1300 Mbps |
| 802.11n | up to 450 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
| Radio cor_rev | 40 |
| Radio 2 | |
| Chip1 | Broadcom BCM4360 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL, RP-SMA |
| MIMO status | 3x3:3 |
| Wireless Standard | IEEE 802.11b/g/n |
| N-QAM | up to 600 Mbps |
| 802.11n | up to 450 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio cor_rev | 40 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Netgear devices with specifications, see Netgear.
Overview
Dead Spot Terminator - 802.11ac Dual Band Gigabit
"PLC_MOUDULE_NETGEAR_60335" is silkscreened on the PLC PCB in the FCC photos.
- The device is presumed to use a Broadcom BCM60335 as the HomePlug controller.
Links of Interest
Reviews
- "U12H270T00", "801466", "REV.1 GP" is silkscreened on the board (Foxconn)
- The device is using BCM4709A + 2x BCM4360 + BCM54612E (SW GbE PLC),
- 3x SE2623L PAMs for the 2.4GHz radio, 3x SE5003L1 PAMs for the 5GHz radio
See also
- Netgear R7000 - Similar router-only model
- Netgear DST6501 - Add-on powerline access point
- Netgear
- Embedded system/wireless router
- Embedded system/Powerline Access Point
- Embedded System Broadcom
- Embedded System BCM4709A0
- Broadcom
- Embedded System ARMv7
- Embedded System Cortex-A9
- Embedded System BCM60335
- Embedded System BCM54612E
- Manuf Foxconn
- Embedded System BCM4360
- Has Mimo Status
- Embedded System IEEE 802.11a/n/ac
- Embedded System IEEE 802.11b/g/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation