Netgear RP614v3
Cable/DSL Web Safe Router | |||||||||||||||||||||
Support | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wikipedia | |||||||||||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||||||||||
3rd Party Firmware | |||||||||||||||||||||
dd-wrt | |||||||||||||||||||||
OpenWrt |
Incompatible | ||||||||||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||||||||||
Platform | |||||||||||||||||||||
Brand • Model • Rev |
Netgear RP614 v3 | ||||||||||||||||||||
Type |
router | ||||||||||||||||||||
Series |
RP614 | ||||||||||||||||||||
CPU1 |
Micrel KS8695X | ||||||||||||||||||||
CPU1 Type |
ARM922T ALTERA | ||||||||||||||||||||
CPU1 Speed |
not specified | ||||||||||||||||||||
Flash1 Chip |
Macronix MX29LV800BBTC-90 | ||||||||||||||||||||
Flash1 Size |
1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> | ||||||||||||||||||||
RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||||||||||
RAM1 Chip |
ESMT M12L64164A-7T | ||||||||||||||||||||
ETH chip1 |
Micrel KS8695X | ||||||||||||||||||||
Switch |
Micrel KS8695X | ||||||||||||||||||||
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||||||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||||||||||
Stock FW OS |
Nucleus RTOS | ||||||||||||||||||||
Expansion IF types |
none specified | ||||||||||||||||||||
Power |
5 VDC, 1 A | ||||||||||||||||||||
Connector type |
barrel | ||||||||||||||||||||
Serial Port (UART) |
yes, 4-pin header, unpopulated, 3.3V TTL, J2, (115200 8N1) | ||||||||||||||||||||
JTAG Port |
yes, looks like it, J5 | ||||||||||||||||||||
Other | |||||||||||||||||||||
Default IP address: 192.168.0.1 | |||||||||||||||||||||
Manuf/OEM/ODM | |||||||||||||||||||||
Retail | |||||||||||||||||||||
(Est.) release date | October 2004 | ||||||||||||||||||||
Country of manuf | China | ||||||||||||||||||||
|
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented Netgear device with specifications, see Netgear.
Overview
"2976233202" and a date code of 0446 is silkscreened on the board.
- The caps on this board are all TAICON branded.
A version string within Netgear's binary FW for this device
- (which is valid for the RP614v2 as well..)
- indicates this device is using the Nucleus PLUS kernel.
The version string is ~ (c) 1993-2002 AT - Nucleus PLUS - IDT32334 SDE-MIPS v. 1.13.2.
JTAG-Serial Info
Serial
Serial Pinouts
The pinout would appear to be the following..
(GND) (RxD) (TxD) [3.3] J2
Boot log
@_@! Post Code Start..... SW_REV_2d02d00KKDebug(Menu): Normal check ok!!! KKDebug(ISR_IrqHandler): Interrupt is 20000!!! KKDebug(ISR_IrqHandler): Interrupt is 20000!!! KKDebug(ISR_IrqHandler): Interrupt is 20000!!! KKDebug(ISR_IrqHandler): Interrupt is 20000!!! KKDebug(ISR_IrqHandler): Interrupt is 20000!!!
Notes
Probable used PSU(s)
The power supply bundled with the device looks to have
- been an OEM AD-051A - Netgear P/N PWR-10028-01.
OEM AD-051A (Netgear PWR-10028-01) (more) | |||||
---|---|---|---|---|---|
Input: 120 VAC, 0.11 A | |||||
Input connector: NEMA 1-15P Style: large, vertical | |||||
Output: 5 VDC, 1 A | |||||
Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? |