Netgear WAG102
From TechInfoDepot
Jump to navigationJump to search
| abg (AG108) | |
|---|---|
| ProSafe 802.11a/g Dual Band Wireless Access Point | |
|
| |
| Support | Support page |
| Wikipedia | Netgear |
| InfoDepot Wiki | Netgear WAG102 |
| WikiDevi.wi-cat.ru | Netgear WAG102 |
| 3rd Party Firmware | |
| dd-wrt | Supported |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Netgear WAG102 |
| FCC ID | PY305200015 |
| Type | access point |
| CPU1 | Atheros AR5312A |
| CPU1 Type | MIPS R4000 |
| CPU1 Speed | 220 MHz |
| Flash1 Chip | Macronix MX29LV320CBTC-70G |
| Flash1 Size | 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip | EtronTech EM639165TS-6G |
| ETH chip1 | Atheros AR5312A |
| ETH chip2 | Realtek RTL8201CP |
| Ethernet Port Count | 1-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
| Stock FW OS | VxWorks |
| Expansion IF types | none specified |
| Power | 12 VDC, 1 A |
| Connector type | barrel |
| Serial Port (UART) | yes |
| JTAG Port | yes |
|
| |
|
| |
| Other | |
|
Default IP address: 192.168.0.232 | |
| Manuf/OEM/ODM | SerComm |
| 3rd Party Firmware Support |
DD-WRT • (List) |
| Retail | |
| FCC approval date | 06 December 2005 |
| ASIN |
B007W5NMSI |
| Radio 1 | |
| Chip1 | Atheros AR5312A |
| Chip2 | Atheros AR5112 |
| Wireless interface OUI | 00:18:4D |
| Antenna Connector Type | U.FL, RP-SMA |
| Wireless Standard | IEEE 802.11a |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
| Radio 2 | |
| Chip1 | Atheros AR5312A |
| Chip2 | Atheros AR2112 |
| Wireless interface OUI | 00:18:4D |
| Antenna Connector Type | U.FL, RP-SMA |
| Wireless Standard | IEEE 802.11b/g |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Netgear devices with specifications, see Netgear.
Overview
The manual states the default SSIDs are NETGEAR-11a and NETGEAR-11g.
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
- Netgear WAG 102 On the DD-WRT Wiki
JTAG-Serial Info
Serial
Serial Pinouts
Serial Pinout: TXD | 3,3V | RXD | GND
Baudrate 9600/8/n/1 (Original-Firmware) 115200/8/n/1 (Redboot/DD-WRT)
Pictures
Categories:
- Netgear
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR5312A
- Atheros
- Embedded System MIPS R4000
- Embedded System
- Embedded System RTL8201CP
- Embedded System Realtek
- Realtek
- Manuf SerComm
- DD-WRT Supported
- Embedded System AR5112
- Embedded System IEEE 802.11a
- Embedded System AR2112
- Embedded System IEEE 802.11b/g
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation