Netgear WN1000RP/Serial info

Boot log

boot log

Decompressing...done CFE version 5.60.130.20 @VERSION_TYPE@ dni 0.48 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Thu Dec 27 04:04:49 EST 2012 (ken.gao@dni-l-sw02) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 131072(0x20000) Found a 4MB ST compatible serial flash et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.130.20 @VERSION_TYPE@ dni 0.48 CPU type 0x19749: 300MHz Tot mem: 16384 KBytes CFE mem: 0x80700000 - 0x8079D4B0 (644272) Data: 0x80733460 - 0x80736670 (12816) BSS: 0x80736670 - 0x807374B0 (3648) Heap: 0x807374B0 - 0x8079B4B0 (409600) Stack: 0x8079B4B0 - 0x8079D4B0 (8192) Text: 0x80700000 - 0x8073345C (210012) ------init2 Device eth0: hwaddr E4-F4-C6-F3-B7-F5, ipaddr 192.168.1.250, mask 255.255.255.0 gateway not set, nameserver not set flag:1 led init clear ret=0xf80 outen ret=0xf80 set ret=0xb80 0 Please press Ctrl-C to stop autoboot xxx ui_cmd_go flag:1 Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null) Loading: Failed. Could not load :: Timeout occured Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .... 1662976 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 ==flag m:0 CPU ProcId is: 0x00019749, options: 0x000021cd Primary instruction cache 32kb, linesize 32 bytes (4 ways) Primary data cache 32kb, linesize 32 bytes (4 ways) Linux version 2.4.20 (ken.gao@dni-l-sw02) (gcc version 3.2.3 with Broadcom modifications) #1 Thu Mar 28 10:38:41 EDT 2013 Found a 4MB ST compatible serial flash Determined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM53572 rev 1 at 300 MHz Calibrating delay loop... 149.91 BogoMIPS Memory: 14372k/16384k available (1383k kernel code, 2012k reserved, 108k data, 112k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: no core PCI: Fixing up bus 0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 8) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize pflash: found no supported devices sflash: squash filesystem with lzma found at block 698 Creating 7 MTD partitions on "sflash": 0x00000000-0x00020000 : "boot" 0x00020000-0x003b0000 : "linux" 0x000ae9dc-0x003b0000 : "rootfs" 0x003b0000-0x003d0000 : "language_table" 0x003d0000-0x003e0000 : "pot" 0x003e0000-0x003f0000 : "nvram2" 0x003f0000-0x00400000 : "nvram" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (128 buckets, 2048 max) - 368 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_time loading BCM fast NAT: INIT NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 netlink_kernel_create ok 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 112k freed nvram2_get nvram2_get over Using /lib/modules/2.4.20/kernel/drivers/net/ctf/ctf.o Using /lib/modules/2.4.20/kernel/drivers/net/emf/emf.o Using /lib/modules/2.4.20/kernel/drivers/net/igs/igs.o Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o insmod: bcm57xx.o: no module by that name found Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o Hit enter to continue...wl0.1: No such device The abbreviation of English is Eng! Failed to fread data from /dev/mtd/3! Didn't find the language table we need! gui_region = English region = English, download_region = Update string table successfully, memory usage: 80KB. The httpd server is running ... led control running.... POT is Running... The POT-(Get/Set) Demo is Running ... WARNING: console log level set to 1 eth1: Operation not permitted wlconf: PHYTYPE: 4 eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Operation not supported NET: Setting wl0.1 hw addr to E4:F4:C6:F3:B7:F5 NET: Error setting hw for wl0.1; returned -1 bcns:0 con_flag:0 info, udhcp client (v0.9.8) started killall: wps_monitor: no process killed killall: wps_ap: no process killed killall: wps_enr: no process killed ses: No such file or directory ses_cl: No such file or directory The attached devices demo is Running ... mac is E4F4C6F3B7F5 Hit enter to continue...connect: Network is unreachable The telnetenable is running ... Hit enter to continue...killall: udhcpd: no process killed /usr/share/udhcpc/default.script: line 260: can't create /proc/switch_phy: nonexistent directory cat: /tmp/link_status: No such file or directory info, udhcp server (v0.9.8) started eth0:the count is 0 wl0.1 the count is 0 Hit enter to continue...ap_at_count:0 -------0--------- rm: cannot remove `/tmp/phy_connection': No such file or directory ++++0++++ bcns:0 con_flag:0 rm: cannot remove `/tmp/ping_result': No such file or directory bcns:0 con_flag:0