Netgear WNR1000v2
bgn (N150) | |||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
N150 Wireless Router | |||||||||||||||||||||||||
![]() | |||||||||||||||||||||||||
Support | |||||||||||||||||||||||||
Wikipedia | |||||||||||||||||||||||||
InfoDepot Wiki | |||||||||||||||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||||||||||||||
3rd Party Firmware | |||||||||||||||||||||||||
dd-wrt | |||||||||||||||||||||||||
OpenWrt | |||||||||||||||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||||||||||||||
Gargoyle |
Status Unknown | ||||||||||||||||||||||||
Platform | |||||||||||||||||||||||||
Brand • Model • Rev |
Netgear WNR1000 v2 | ||||||||||||||||||||||||
FCC ID | |||||||||||||||||||||||||
IC ID | |||||||||||||||||||||||||
Type |
wireless router | ||||||||||||||||||||||||
CPU1 ![]() |
Atheros AR7240 | ||||||||||||||||||||||||
CPU1 Type |
MIPS 24Kc | ||||||||||||||||||||||||
CPU1 Speed |
400 MHz | ||||||||||||||||||||||||
Flash1 Chip |
Macronix MX25L3205DM2I-12G | ||||||||||||||||||||||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||||||||||||||||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||||||||||||||
RAM1 Chip |
SK hynix HY5DU561622FTP-D43 | ||||||||||||||||||||||||
ETH chip1 |
Atheros AR7240 | ||||||||||||||||||||||||
Switch |
Atheros AR7240 | ||||||||||||||||||||||||
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||||||||||||||||||||
Wired Standard |
IEEE 802.3/3u | ||||||||||||||||||||||||
802dot11 OUI: 00:24:B2 (14 E, 16 W), 00:26:F2 (10 E, 10 W), 30:46:9A (12 E, 15 W), A0:21:B7 (9 E, 8 W), C0:3F:0E (14 E, 12 W), C4:3D:C7 (8 E, 5 W), E0:91:F5 (12 E, 13 W) | |||||||||||||||||||||||||
Stock bootloader |
U-Boot 1.1.4 | ||||||||||||||||||||||||
Stock FW OS |
Linux 2.6.15 OpenWrt-deriv | ||||||||||||||||||||||||
Expansion IF types |
none | ||||||||||||||||||||||||
Power |
12 VDC, 1 A | ||||||||||||||||||||||||
Connector type |
barrel 2.1 mm (OD) 5.5 mm (ID) 9.5 mm (LEN) | ||||||||||||||||||||||||
Serial Port (UART) |
yes, 4-pin header, populated, internal, 3.3V TTL, (115200 8N1), JP2 | ||||||||||||||||||||||||
Other | |||||||||||||||||||||||||
Default SSID: NETGEAR (43 addl. devices) | |||||||||||||||||||||||||
Manuf/OEM/ODM | |||||||||||||||||||||||||
3rd Party Firmware Support | |||||||||||||||||||||||||
Retail | |||||||||||||||||||||||||
Availability | End of Life | ||||||||||||||||||||||||
FCC approval date | 25 September 2009 | ||||||||||||||||||||||||
ASINs |
B00894WP4S ![]() B001UI4RTG ![]() multiple uses | ||||||||||||||||||||||||
Country of manuf | China | ||||||||||||||||||||||||
Radio 1 | |||||||||||||||||||||||||
Chip1 |
Atheros AR9285 | ||||||||||||||||||||||||
Wireless interface OUI |
00:24:B2, 00:26:F2, 30:46:9A, A0:21:B7, C0:3F:0E, C4:3D:C7, E0:91:F5 | ||||||||||||||||||||||||
Antenna Connector Type |
U.FL | ||||||||||||||||||||||||
MIMO status |
1x1:1 | ||||||||||||||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||||||||||||||
802.11n |
up to 150 Mbps | ||||||||||||||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||||||||||
| |||||||||||||||||||||||||
|
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Netgear device with specifications, see Netgear.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"2976333104" is confirmed to be silkscreened on multiple production model boards.
- The same basic hardware is used for the Netgear WN604.
- The same hardware is also used in Netgear WNR612v2.
- all ports (both uplink and downlink) feature automatic MDI/crossover
- Known to be running a modified version of OpenWRT 7.09, codenamed "KAMIKAZE"
Notable mentions:
PSU
The power adapter included with the device is a PI Electronics (H.K.) Ltd.
- T012LF1209 16100-2LF (12V, 1A), Netgear P/N: 332-10166-01.
- Centre positive 5,5mm/2,1mm barrel. Efficiency Level V,
- emits high frequency squeal/high-pitched electronic whine
- sound WNR1000v2 itself is silent. UL File Number: E186735.
PI Electronics T012LF1209 16100-2LF (more) | |||||
---|---|---|---|---|---|
Input: 100-120 VAC ~ 50/60 Hz, 0.5 A | |||||
Input connector: NEMA 1-15P | |||||
Output: 12 VDC, 1 A | |||||
Output connector: barrel (center +) OD: 5.5 mm ID: 2.1 mm LEN: 9.5 mm |
Links of Interest
Wikis
Reviews
Forum threads
- OpenWRT Builds for NETGEAR WNR1000V2/VC on forum.openwrt.org
- Flashing to OpenWRT from Factory Firmware on gist.github.com
- Netgear WNR1000v2: some success! on forum.openwrt.org
- Netgear WN604/WNR612v2/WNR1000v2 on forum.openwrt.org
- Netgear WNR1000v2 Request on dd-wrt.com
- Netgear WNR1000v2 Spec. on dd-wrt.com
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
![]() | This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
![]() | OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt Wiki
On the OpenWrt Forum
On the OpenWrt Forum
OpenWrt Target: ar71xx-ath79
OpenWrt Subtarget: tiny
OpenWrt Package architecture: mips_24kc
Support started version: 15.05
Current supported version: 18.06.0
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
---> to AR9285 Wifi Controller UART JP2 • (GND) (RxD) (TxD) [3.3V] <--- to AR7140 CPU
Info derived from
boot log >> |
---|
U-Boot 1.1.4 (Sep 3 2009 - 20:06:10) WNR1000v2-VC (ar7240) U-boot dni7 V0.8 DRAM: sri #### TAP VALUE 1 = d, 2 = e 32 MB Top of RAM usable for U-Boot at: 82000000 Reserving 269k for U-Boot at: 81fbc000 Reserving 192k for malloc() at: 81f8c000 Reserving 44 Bytes for Board Info at: 81f8bfd4 Reserving 36 Bytes for Global Data at: 81f8bfb0 Reserving 128k for boot params() at: 81f6bfb0 Stack Pointer at: 81f6bf98 Now running in RAM - U-Boot at: 81fbc000 id read 0x100000ff flash size 4194304, sector count = 64 Flash: 4 MB In: serial Out: serial Err: serial Net: ag7240_enet_initialize... No valid address in Flash. Using fixed address No valid address in Flash. Using fixed address : cfg1 0xf cfg2 0x7014 eth0: 00:03:7f:09:0b:ad eth0 up : cfg1 0xf cfg2 0x7214 eth1: 00:03:7f:09:0b:ad ATHRS26: resetting s26 ATHRS26: s26 reset done eth1 up eth0, eth1 Trying eth1 eth1 link down FAIL Trying eth0 eth0 link down FAIL Client starts...[Listening] for ADVERTISE...TTT Retry count exceeded; boot the image as usual nmrp server is stopped or failed ! Hit any key to stop autoboot: 0 Verifying Checksum ... OK ### SQUASHFS loading 'image/uImage' to 0x80800000 ### SQUASHFS load complete: 708088 bytes loaded to 0x80800000 ## Booting image at 80800000 ... Image Name: Linux Kernel Image Created: 2013-08-13 14:28:16 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 708024 Bytes = 691.4 kB Load Address: 80002000 Entry Point: 8020d000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 8020d000) ... ## Giving linux memsize in bytes, 33554432 Starting kernel ... Booting AR7240(Python)... Linux version 2.6.15 (root@ubuntu) (gcc version 3.4.4 (OpenWrt-2.0)) #199 Tue Aug 13 10:28:14 EDT 2013 flash_size passed from bootloader = 4 CPU revision is: 00019374 Determined physical RAM map: memory: 02000000 @ 00000000 (usable) Built 1 zonelists Kernel command line: console=ttyS0,115200 root=31:08 rootfstype=squashfs init=/etc/preinit mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),3392k(rootfs),64k(config),128k(language_table),64k(pot),64k(traffic_meter),64k(ART),3473344@327744(mount_fs) Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). Cache parity protection disabled PID hash table entries: 256 (order: 8, 4096 bytes) Using 170.000 MHz high precision timer. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 30108k/32768k available (1739k kernel code, 2644k reserved, 349k data, 108k init, 0k highmem) Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. NET: Registered protocol family 16 Returning IRQ 48 AR7240 GPIOC major 0 squashfs: version 3.0 (2006/03/15) Phillip Lougher Initializing Cryptographic API io scheduler noop registered io scheduler deadline registered Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A 9 cmdlinepart partitions found on MTD device ar7240-nor0 Creating 9 MTD partitions on "ar7240-nor0": 0x00000000-0x00040000 : "u-boot" 0x00040000-0x00050000 : "u-boot-env" 0x00050000-0x003a0000 : "rootfs" 0x003a0000-0x003b0000 : "config" 0x003b0000-0x003d0000 : "language_table" 0x003d0000-0x003e0000 : "pot" 0x003e0000-0x003f0000 : "traffic_meter" 0x003f0000-0x00400000 : "ART" 0x00050040-0x003a0000 : "mount_fs" mtd: partition "mount_fs" doesn't start on an erase block boundary -- force read-only u32 classifier Perfomance counters on nf_conntrack version 0.4.1 (256 buckets, 2048 max) NET: Registered protocol family 2 IP route cache hash table entries: 512 (order: -1, 2048 bytes) TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered ip_conntrack version 2.4 (256 buckets, 2048 max) - 260 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team IPP2P v0.8.2 loading DNIFILTER loading TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 17 Ebtables v2.0 registered VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 108k freed Algorithmics/MIPS FPU Emulator v1.5 - init - init started: BusyBox v1.4.2 (2013-08-13 10:24:29 EDT) multi-call binary Loading data from /dev/mtd/3 ... The data configuration is Valid The data center is Running ... /etc/net6conf/6proc: /etc/net6conf/6proc: 33: cannot create /proc/sys/net/ipv6/conf/eth0/accept_dad: Directory nonexistent /etc/net6conf/6proc: /etc/net6conf/6proc: 33: cannot create /proc/sys/net/ipv6/neigh/eth0/not_send_neighbor_solicitation: Directory nonexistent /etc/net6conf/6proc: /etc/net6conf/6proc: 33: cannot create /proc/sys/net/ipv6/neigh/eth1/not_send_neighbor_solicitation: Directory nonexistent ipt_CONENAT: module license 'unspecified' taints kernel. ip_conntrack_rtsp v0.6.21 loading ip_nat_rtsp v0.6.21 loading ip_conntrack_proto_esp loaded ip_nat_proto_esp loaded ip_conntrack_pptp version 3.1 loaded ip_nat_pptp version 3.0 loaded Generating Rules... Done! rmmod: ip_nat_dnisip.ko: Success rmmod: ip_conntrack_dnisip.ko: Success POT is Running... The POT-(Get/Set) Demo is Running ... POT is Finished!!! SN: 28C6295P01937 WAN MAC: 20:E5:2a:56:6F:CF AG7240: Length per segment 1536 AG7240: Max segments per packet 1 AG7240: Max tx descriptor count 40 AG7240: Max rx descriptor count 252 AG7240: fifo cfg 3 01f00140 AG7240CHH: Mac address for unit 0 AG7240CHH: 20:e5:2a:56:6f:cf AG7240CHH: Mac address for unit 1 AG7240CHH: 20:e5:2a:56:6f:ce INIT-SWITCH: Default WAN MAC is : 20:e5:2a:56:6f:cf ag7240_ring_alloc Allocated 640 at 0x81c3ac00 ag7240_ring_alloc Allocated 4032 at 0x81365000 Setting PHY... ADDRCONF(NETDEV_UP): eth0: link is not ready /etc/rc.common: eval: 13: cannot create /proc/sys/net/ipv6/conf/eth0/accept_dad: Directory nonexistent /etc/rc.common: eval: 13: cannot create /proc/sys/net/ipv6/neigh/eth0/not_send_neighbor_solicitation: Directory nonexistent device eth1 entered promiscuous mode ag7240_ring_alloc Allocated 640 at 0x81c3a800 ag7240_ring_alloc Allocated 4032 at 0x8137b000 ATHRS26: resetting s26 ATHRS26: s26 reset done Setting PHY... ADDRCONF(NETDEV_UP): eth1: link is not ready /etc/rc.common: eval: 13: cannot create /proc/sys/net/ipv6/neigh/eth1/not_send_neighbor_solicitation: Directory nonexistent /etc/rc.common: eval: 13: cannot create /proc/sys/net/ipv6/neigh/eth1/not_send_neighbor_solicitation: Directory nonexistent udhcp server (v0.9.8) started The attached devices demo is Running ... killall: utelnetd: no process killed killall: telnetenable: no process killed The telnetenable is running ... Deleting static route ... Done! Adding static route ... Done! The HNAP Demo is running on br0 : 192.168.1.1 20:E5:2A:56:6F:CE Terminated dnsmasq: started, version 2.39 cache disabled dnsmasq: compile time options: IPv6 GNU-getopt no-ISC-leasefile no-DBus no-I18N no-TFTP dnsmasq: no servers found in /tmp/resolv.conf, will retry ag7240_ring_free Freeing at 0x81c3ac00 ag7240_ring_free Freeing at 0x81365000 ag7240_ring_alloc Allocated 640 at 0x81c3ac00 ag7240_ring_alloc Allocated 4032 at 0x81365000 Setting PHY... ADDRCONF(NETDEV_UP): eth0: link is not ready udhcp client (v0.9.8) started killall: pppd: no process killed Sending discover... Sending discover... Sending discover... No lease, forking to background. killall: ntpclient: no process killed time zone index is : 20 Run NTP Client with setting: pri:time-b.netgear.com sec:time-c.netgear.com killall: miniupnpd: no process killed Jan 1 00:00:47 miniupnpd[435]: listening on 192.168.1.1:5555 grep: /proc/pci: No such file or directory /etc/rc.d/rc.wlan: /etc/rc.d/rc.wlan: 56: uname: not found Args: 1 ath_hal: 0.9.17.1 (AR5416, REGOPS_FUNC, WRITE_EEPROM, 11D) wlan: 0.8.4.2 (Atheros/multi-bss) ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved ath_pci: 0.9.4.5 (Atheros/multi-bss) wifi0: Atheros 9285: mem=0x10000000, irq=48 hw_base=0xb0000000 wlan: mac acl policy registered wlan_me: Version 0.1 Copyright (c) 2008 Atheros Communications, Inc. All Rights Reserved wifi1 no private ioctls. Creating ap for NETGEAR on Added ath0 mode master Interface doesn't accept private ioctl... HALDbg (8BE0): Operation not permitted Invalid command : ampdumin Created ath0 mode ap for NETGEAR /etc/ath/activateVAP: /etc/ath/activateVAP: 62: uname: not found lo no wireless extensions. sit0 no wireless extensions. br0 no wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. wifi0 no wireless extensions. device ath0 entered promiscuous mode /etc/ath/activateVAP: /etc/ath/activateVAP: 1: arping: not found >>>>> WPS MODE, 1 >>>>> WPS ENABLED, PSK cat: /etc/wpa2/WSC_ath0.conf: No such file or directory >>>>> WPS Translate, Index:0 Making Topology File . . . Reading topology file /var/run/topology.conf ... Starting Firewall... Done! time zone index is : 20 Run NTP Client with setting: pri:time-b.netgear.com sec:time-c.netgear.com dnsmasq: failed to create listening socket: Address already in use The region number is: 0xFFFF REGION is NULL gui_region = English region = English, download_region = Update string table successfully, memory usage: 276KB. The httpd server is running ... /etc/rc.common: eval: 13: detplc: not found Start utelnetd by telnetenable ag7240_ring_free Freeing at 0x81c3ac00 ag7240_ring_free Freeing at 0x81365000 ag7240_ring_alloc Allocated 640 at 0x81c3ac00 ag7240_ring_alloc Allocated 4032 at 0x81365000 Setting PHY... ADDRCONF(NETDEV_UP): eth0: link is not ready route: SIOC[ADD|DEL]RT: Network is unreachable device eth0 is not a slave of br0 cat: /tmp/ipv6_auto_output: No such file or directory Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. DHCPv6 client is not running! Return DHCPv6 client is not running! Return cat: /tmp/ipv6_auto_output: No such file or directory killall: radvd: no process killed killall: dhcp6s: no process killed Shutting down zebra: Terminated Shutting down ripngd: Terminated Command line is not complete. Try option "help" Command line is not complete. Try option "help" RTNETLINK answers: No such process RTNETLINK answers: Invalid argument RTNETLINK answers: No such file or directory Stopping Firewall... IPv6 Done! /etc/net6conf/6proc: /etc/net6conf/6proc: 33: cannot create /proc/sys/net/ipv6/neigh/eth1/not_send_neighbor_solicitation: Directory nonexistent killall: daemonv6: no process killed daemonv6 is staring! 6service: Wait timeout and can't get IPv6 Prefix The prefix information for LAN host is unkown start dhcp6s Shutting down zebra: Terminated Shutting down ripngd: Terminated Starting Firewall... killall: lld2d: no process killed traffic_meter start : . System startup completed! /etc/init.d/rcS: /etc/init.d/rcS: 21: cannot create /proc/sys/net/ipv4/ip_connt Boot up procedure is Finished!!! Please press Enter to activate this console. Saving Data... Done! Saving Data... Done! dnsmasq: NOT DNS Hijack mode!!! dnsmasq: overflow: 3 log entries lost dnsmasq: NOT DNS Hijack mode!!! Starting Firewall... Done! BusyBox v1.4.2 (2013-08-13 10:24:29 EDT) Built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M KAMIKAZE (7.09) ----------------------------------- * 10 oz Vodka Shake well with ice and strain * 10 oz Triple sec mixture into 10 shot glasses. * 10 oz lime juice Salute! --------------------------------------------------- root@WNR1000v2:/# |
cat /proc/cpuinfo • >> |
---|
root@WNR1000v2:/# cat /proc/cpuinfo system type : Atheros AR7240 (Python) processor : 0 cpu model : MIPS 24K V7.4 BogoMIPS : 225.28 wait instruction : yes microsecond timers : yes tlb_entries : 16 extra interrupt vector : yes hardware watchpoint : yes ASEs implemented : mips16 VCED exceptions : not available VCEI exceptions : not available |
ps • >> |
---|
root@WNR1000v2:/# ps PID Uid VmSize Stat Command 1 root 356 S init 2 root SWN [ksoftirqd/0] 3 root SW< [events/0] 4 root SW< [khelper] 5 root SW< [kthread] 8 root SW< [kblockd/0] 30 root SW [pdflush] 31 root SW [pdflush] 33 root SW< [aio/0] 32 root SW [kswapd0] 44 root SW [mtdblockd] 131 root 268 S klogd 135 root 228 S datalib 206 root 108 S /usr/sbin/potval 283 root 236 S udhcpd /tmp/udhcpd.conf 287 root 124 S /usr/sbin/net-scan 296 root 156 S /usr/sbin/telnetenable 300 root 112 S /usr/sbin/hnapd 329 root 80 S udhcpc -b -i eth0 -h WNR1000v2 -r 0.0.0.0 378 root 276 S /usr/sbin/miniupnpd 1474 root 124 S /usr/bin/wlanlog 1482 root 280 S syslogd -m 0 -T GMT+8 1494 root 220 S /usr/sbin/ntpclient 1499 root 348 S crond -c /tmp/etc/crontabs -T GMT+8 1502 root 372 S /usr/sbin/dnsmasq -c 0 -d -h -r /tmp/resolv.conf 1507 root 724 S uhttpd 1510 root 140 S inetd 1515 root 232 S /usr/bin/detcable 2 1518 root 420 S /bin/sh /sbin/button_detecte 1546 root 304 S /sbin/traffic_meter 1553 root 456 S -sh 2222 root 284 S /bin/sleep 1 2225 root 372 R ps |
lsmod • >> |
---|
root@WNR1000v2:/# lsmod Module Size Used by Tainted: P wlan_scan_ap 9152 0 ath_pktlog 14336 0 wlan_me 9152 0 wlan_acl 5152 0 wlan_wep 5536 0 wlan_tkip 12608 0 wlan_ccmp 7968 0 wlan_xauth 1024 0 ath_pci 58496 0 ath_dev 123344 2 ath_pktlog,ath_pci ath_rate_atheros 46928 2 ath_pktlog,ath_dev wlan 248448 11 wlan_scan_ap,ath_pktlog,wlan_me,wlan_acl,wlan_wep, wlan_tkip,wlan_ccmp,wlan_xauth,ath_pci,ath_dev wlan_ext 3328 1 wlan ath_hal 276928 4 ath_pktlog,ath_pci,ath_dev ar7240gpiointr 4000 0 ar7240gpio 2720 0 ag7240_mod 32272 1 ar7240gpio ip_nat_dnisip 6304 0 ip_conntrack_dnisip 5776 1 ip_nat_dnisip ipt_TRIGGER 3200 1 ipt_spiadvDoS 12912 1 ipt_NETGEAR_REJECT 12320 0 ipt_urlBlock 5200 0 ipt_dnshijack 1408 1 ipt_spiDoS 3136 2 ip_nat_pptp 4528 0 ip_conntrack_pptp 7312 1 ip_nat_pptp ip_nat_dnirtsp 6224 0 ip_conntrack_dnirtsp 8256 1 ip_nat_dnirtsp ip_nat_dnih323 6016 0 ip_conntrack_dnih323 37440 1 ip_nat_dnih323 ip_nat_STARCRAFT 1504 0 ipt_CONENAT 1760 2 ip_nat_ftp 2464 0 ip_conntrack_ftp 5520 1 ip_nat_ftp |
devices • >> |
---|
root@WNR1000v2:/proc/bus/pci# cat devices 0000 168c002b 30 10000004 00000000 00000000 00000000 00000000 00000000 00000000 00010000 00000000 00000000 00000000 00000000 00000000 00000000 ath_pci |
- Netgear
- Embedded system/wireless router
- Embedded System Atheros
- Embedded System AR7240
- Atheros
- Embedded System MIPS 24Kc
- Embedded System
- Manuf Delta Networks
- OpenWrt Supported
- Embedded System AR9285
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation