Nexxt Solutions Polaris 150 (ARNPR154U1)
bgn (N150) | |||||
---|---|---|---|---|---|
Wireless-N 3G Mobile Router | |||||
3rd Party Firmware | |||||
dd-wrt | |||||
OpenWrt |
Incompatible | ||||
Tomato any flavor |
Incompatible | ||||
Platform | |||||
Brand • Model • Rev |
Nexxt Solutions Polaris 150 | ||||
Model Part Number |
ARNPR154U1 | ||||
FCC ID | |||||
Type |
mobile router | ||||
CPU1 | |||||
CPU1 Type |
MIPS 24Kc | ||||
CPU1 Speed |
400 MHz | ||||
Flash1 Chip |
Spansion S25FL032PIF | ||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
RAM1 Chip |
Zentel A3S56D40ETP-G5 | ||||
ETH chip1 | |||||
Ethernet Port Count |
1-100MbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u | ||||
802dot11 OUI: none specified | |||||
Expansion IF types |
USB 2.0 | ||||
USB ports |
1 | ||||
USB Hub Compatible |
Untested | ||||
Power |
5 VDC, 1 A | ||||
Connector type |
USB Female Micro-B | ||||
Other | |||||
Default SSID: Nexxt_XXXXXX (3 addl. devices) | |||||
Manuf/OEM/ODM | |||||
Retail | |||||
FCC approval date | 24 June 2013 | ||||
Country of manuf | China | ||||
Radio 1 | |||||
Chip1 | |||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
none specified | ||||
MIMO status |
1x1:1 | ||||
Wireless Standard |
IEEE 802.11b/g/n | ||||
802.11n |
up to 150 Mbps | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
|
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Nexxt Solutions device with specifications, see Nexxt Solutions.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"2050500190" and "Rev:1.1" is silkscreened on the board in the FCC photos.
- This device is clearly a TP-LINK TL-WR703N v1.0.
The power adapter shown in the FCC photos is a HuntKey HKA00605010-2B
- (100-240VAC ~50/60Hz, 0.2A -> 5.0VDC, 1.0A).
Default settings (including the SSID) are per the FCC manual.