NixCore X1
From TechInfoDepot
Jump to navigationJump to search
| bgn (N150) | |
|---|---|
| mini module | |
| Homepage | Product page |
| WikiDevi.wi-cat.ru | NixCore |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Was Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | NixCore X1 |
| FCC ID | none specified |
| Type | mini module |
| CPU1 | Ralink RT5350 |
| CPU1 Type | MIPS 24KEc |
| CPU1 Speed | 360 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Ralink RT5350 |
| Ethernet Port Count | 1-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
| Stock bootloader | U-Boot |
| Expansion IF types | USB 2.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Power | 3.3 VDC, ? A |
| Connector type | none (pads) |
| Serial Port (UART) | yes, (115200 8N1) |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt (Was) |
| Retail | |
| (Est.) initial retail price (in USD): | $30 |
| Radio 1 | |
| Chip1 | Ralink RT5350 |
| Wireless interface OUI | 00:02:2A |
| Antenna Connector Type | U.FL |
| MIMO status | 1x1:1 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 150 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"LP962M00A1 Ver 1.3" is silkscreened on the board shown on the NixCore site.
- The board on the site has a MAC label with an OUI of 00:02:2A (Asound). It might be wrong, who knows..
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 22.03.7
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 22.03.7
Comment:
Vendor firmware is based on OpenWrt/LEDE; Final version: 22.03.7
Vendor firmware is based on OpenWrt/LEDE; Final version: 22.03.7
Please insert instructions here