Nortel WLAN Access Point 2330

abg (AG108)
Dual mode 2.4GHz / 5GHz Access Point
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Nortel WLAN Access Point 2330
FCC ID	RVW2330
IC ID	332R-2330
Type	access point
CPU1	Atheros AR5312A
CPU1 Type	MIPS R4000
CPU1 Speed	220 MHz
Flash1 Chip	Macronix MX29LV160BTTC-70G
Flash1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip	Micron MT48LC4M32B2-7 G
ETH chip1	Atheros AR5312A
ETH chip2	IC+ IP101A
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 00:15:E8 Ethernet OUI: 00:15:E8
Expansion IF types	none specified
PoE	802.3af, standard
Power	48 VDC, 0.4 A
Connector type	Ethernet (PoE)
Serial Port (UART)	yes, internal, 4-pin header, unpopulated, 3.3V TTL, (38400 8N1), JP2, Alpha type1 pinout
Additional chips 2.4GHz Power Amplifier IC;Microsemi;LX5510;1; 4.5 to 6GHz Power Amplifier IC;Microsemi;LX5506;;1;
Other
Manuf/OEM/ODM	Alpha Networks WAP-D25
Retail
FCC approval date	28 September 2005
UPC	056097035494 (UPC DB, On eBay)
ASIN	B000BREMF6
Country of manuf	Taiwan
Radio 1
Chip1	Atheros AR5312A
Chip2	Atheros AR5112A
Wireless interface OUI	00:15:E8
Antenna Connector Type	U.FL, RP-SMA
Wireless Standard	IEEE 802.11a
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio 2
Chip1	Atheros AR5312A
Chip2	Atheros AR2112A
Wireless interface OUI	00:15:E8
Antenna Connector Type	U.FL, RP-SMA
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented IC+ chipsets with specifications, see IC+.

For a list of all currently documented Nortel device with specifications, see Nortel.

• 54 Mbps - 5GHz 802.11a

• 54 Mbps - 2.4GHz 802.11g = AG108 class

Overview

"8WAPD25..1A1" is silkscreened on the board in the FCC photos.

It seems to be identical to the Enterasys RBT-1602 (under the Trapeze Networks grantee code).

"8WAPD25..3A1" is silkscreened on a production model board (8-layer).

JTAG-Serial Info

Serial

Serial Pinouts

JP2
(TxD) (GND) (3.3)       [RxD]

Output

    Trapeze Networks AP Bootstrap 1.5 (01/xx/05)


GO 1 entry_addr 80400000 ....

AP Boot Loader version 16
Stage 1 boot code build 4.0.7.5_080805_0731__AP
access point startup

With keypresses following, an

ap_mon:

shell is displayed. No commands are known and nothing obvious seems to be accepted. JTAG access will likely be necessary to do anything useful..