Nuvoton NuMaker RTU NUC98
From TechInfoDepot
Jump to navigationJump to searchNuMaker RTU NUC980 | |
Homepage | |
---|---|
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
Nuvoton NK-RTU980 V1.0 |
Type |
single-board computer |
CPU1 |
Nuvoton NUC980 |
CPU1 Type |
ARM926EJ-S |
CPU1 Speed |
300 MHz |
CPU2 |
Nuvoton NUC123 |
CPU2 Speed |
72 MHz |
Flash1 Chip |
Winbond W25Q256JVEQ |
Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (SPI) |
Flash2 Chip |
Nuvoton NUC123 |
Flash2 Size |
68 KiB 0.0664 MiB <br />69,632 B <br />544 Kib <br />0.531 Mib <br />6.484985e-5 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (DDR2) |
RAM1 Chip |
Nuvoton NUC980 |
RAM2 Size |
20 KiB 0.0195 MiB <br />20,480 B <br />160 Kib <br />0.156 Mib <br />1.907349e-5 GiB <br /> |
RAM2 Chip |
Nuvoton NUC123 |
ETH chip1 |
Nuvoton NUC980 |
ETH chip2 |
IC+ IP101GR |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
| |
Stock bootloader |
U-Boot 2016.11 |
Stock FW OS |
Linux 4.4.207 Buildroot |
Expansion IF types |
USB 2.0 |
USB ports |
2 |
USB Hub Compatible |
Untested |
Power |
5 VDC, 2 A |
Connector type |
USB Female Micro-B |
Serial Port (UART) |
yes, USB Female Micro-B, (115200 8N1), |
JTAG Port |
yes, 8-pin header, unpopulated, J1 |
Flags: CAN Bus, RS485, GPIO, I2C, SPI | |
Additional chips | |
Other | |
Default IP address: 192.168.0.100 | |
Manuf/OEM/ODM | |
Retail | |
(Est.) release date | May 2020 |
(Est.) initial retail price (in USD): | $29 |
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Nuvoton MCU's with specifications, see Nuvoton.
For a list of all currently documented Nuvoton device with specifications, see Nuvoton.
Overview
See also: List of Single-board computers