Olimex OLinuXino-NANO
From TechInfoDepot
Jump to navigationJump to searchSingle Board Computer | |
Homepage | |
---|---|
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Olimex OLinuXino-NANO |
Type |
single-board computer |
CPU1 |
Freescale i.MX233 |
CPU1 Speed |
454 MHz |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (microSD) |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Brand? Model? |
| |
Stock bootloader |
U-Boot |
Expansion IF types |
microSD, USB 2.0 |
USB ports |
1 |
SD/MMC Slots |
1 |
USB Hub Compatible |
Untested |
Power |
? VDC, ? A 3.7v BAT Li-Po, ? mAh, ? cells |
Serial Port (UART) |
yes |
JTAG Port |
yes |
Other | |
| |
3rd Party Firmware Support |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Olimex device with specifications, see Olimex.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: mxs
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 14.07
Current supported version: 23.05.4
On the OpenWrt Wiki
OpenWrt Target: mxs
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 14.07
Current supported version: 23.05.4
Please insert instructions here