Olimex i.MX8MP-SOM-EVB

From TechInfoDepot
Jump to navigationJump to search
Single Board Computer
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Olimex i.MX8MP-SOM-EVB
Type SoM, single-board computer
CPU1 checkY NXP i.MX8MP
CPU1 Type ARM Cortex-A72
CPU1 Speed 1.6 GHz ( 4 cores )
Flash1 Chip Brand? Model?
Flash1 Size ? MiB (eMMC)
RAM1 Size 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br />
RAM1 Chip Brand? Model?
ETH chip1 NXP i.MX8MP
ETH chip2 Micrel Model?
Ethernet Port Count 2-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab
Stock bootloader U-Boot
Expansion IF types USB 3.0, M.2 2280, microSDHC
Mini PCIe slots 1
USB ports 2
SD/MMC Slots 1
USB Hub Compatible Untested
Power 5 VDC, ? A
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)

For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.

For a list of all currently documented Olimex devices with specifications, see Olimex.

Flashing

Flashing OpenWrt

Target: imx
Subtarget: cortexa53
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
LAN Hardware: Micrel PHY
Installation method(s):
SD card
Recovery method(s):
SD card
git • >>
imx: add support for Olimex i.MX8MP-SOM-EVB
This adds support for an i.MX8-based system-on-module + EVB board.

CPU:      NXP i.MX8MP @ 1600MHz (quad-core A53)
Memory:   4Gb
PCI:      1x PCIe M.2 2280 slot
Ethernet: 2x GE with Micrel PHY (no MAC in EEPROM)
USB:      2x 3.0
UART:     separate UARTs for the A53 and the M7 cores
Storage:  microSD slot, eMMC headers
Misc:     2KByte EEPROM (at24), audio via ES8328 (unsupported), 2x CAN, HDMI
Power:    5VDC

 - Patches refreshed as required
 - The cortexa53 subtarget selects Micrel PHY from now on
 - u-boot added for the board

Installation:
  Use the standard installation to an SD-card by writing out the
  squashfs image (openwrt-imx-cortexa53-olimex_imx8mp-som-squashfs-img.gz)
  to it.

Signed-off-by: Zoltan HERPAI