We're aware of the timeouts being generated on write actions, we're currently debugging this to find a solution.
Olimex OLinuXino-NANO
From TechInfoDepot
(Redirected from Olimex iMX233-OLinuXino-NANO)
Jump to navigationJump to search
Single Board Computer | |
![]() | |
Homepage | Product page |
---|---|
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | Olimex OLinuXino-NANO |
Type | single-board computer |
CPU1 ![]() | Freescale i.MX233 |
CPU1 Type | ARM926J |
CPU1 Speed | 454 MHz |
Flash1 Chip | Brand? Model? |
Flash1 Size | 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (microSD) |
RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip | Brand? Model? |
ETH chip1 | Brand? Model? |
| |
Stock bootloader | U-Boot |
Expansion IF types | microSD, USB 2.0 |
USB ports | 1 |
SD/MMC Slots | 1 |
USB Hub Compatible | Untested |
Power |
? VDC, ? A 3.7v BAT Li-Po, ? mAh, ? cells |
Serial Port (UART) | yes |
JTAG Port | yes |
| |
| |
Other | |
| |
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Olimex devices with specifications, see Olimex.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: mxs
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 14.07
Current supported version: 24.10.2
WLAN Comment:
No WLAN
On the OpenWrt Wiki
OpenWrt Target: mxs
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 14.07
Current supported version: 24.10.2
WLAN Comment:
No WLAN
Please insert instructions here