Open-Mesh OM1P
From TechInfoDepot
Jump to navigationJump to search
| bg (G54) | |
|---|---|
| Professional Mesh Wireless Router | |
|
| |
| WikiDevi.wi-cat.ru | Open-Mesh OM1P |
| 3rd Party Firmware | |
| dd-wrt | Supported |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Open-Mesh OM1P |
| FCC ID | WT8-OM1P |
| IC ID | 3857A-OM1P |
| Type | mesh node |
| CPU1 | Atheros AR2315A |
| CPU1 Type | MIPS 4KEc |
| CPU1 Speed | 180 MHz |
| Flash1 Chip | STMicro ST25P64V6P |
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip | SK hynix HY57V561620FTP-H |
| ETH chip1 | Atheros AR2315A |
| ETH chip2 | Atheros AR8102 |
| Ethernet Port Count | 1-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
| Expansion IF types | none specified |
| Power | 12 VDC, 1 A |
| Connector type | barrel |
| Serial Port (UART) | yes, internal, populated, 3.3V TTL, 4-pin header, (115200 8N1) |
|
| |
|
| |
| Other | |
|
| |
| Manuf/OEM/ODM | Accton MR3201A |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) , DD-WRT • (List) |
| Retail | |
| Availability | common |
| FCC approval date | 21 January 2009 |
| ASIN |
B002OFHY3U |
| Radio 1 | |
| Chip1 | Atheros AR2315A |
| Wireless interface OUI | 00:12:CF |
| Antenna Connector Type | none specified |
| Wireless Standard | IEEE 802.11b/g |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Open-Mesh devices with specifications, see Open-Mesh.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
"142320120003A R0A" is silkscreened on the board in the FCC photos.
Links of Interest
- indicates there was an earlier version of the OM1P.. 1412315<...> is silkscreened on that board, which would seem to indicate it is an Accton SAP2315A
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = fonera 2100 build
- watchdog problem! install micro redboot first!
Please insert instructions here
Flashing OpenWrt
| This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
Support started version: ?
Current supported version: Reported on WikiDevi
Current supported version: Reported on WikiDevi
Please insert instructions here
Categories:
- Open-Mesh
- Embedded system/mesh node
- Embedded System Atheros
- Embedded System AR2315A
- Atheros
- Embedded System MIPS 4KEc
- Embedded System
- Embedded System AR8102
- Manuf Accton
- OpenWrt Supported
- DD-WRT Supported
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation