Open-Mesh OM2P-HS v3

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N300)
mesh node, access point
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev Open-Mesh OM2P-HS v3
FCC ID none specified
Type mesh node, access point
CPU1 checkY Atheros AR9341
CPU1 Speed 535 MHz
Flash1 Chip Brand? Model?
Flash1 Size 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 Atheros AR9341
Switch Atheros AR9341
Ethernet Port Count 2-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types none specified
PoE 802.3af, standard
Serial Port (UART) yes
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 Atheros AR9341
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Open-Mesh OM2P v1AtherosAtheros
Open-Mesh OM2P v2AtherosAtheros
Open-Mesh OM2P v4Qualcomm AtherosQualcomm Atheros
Open-Mesh OM2P-HS v1AtherosAtheros
Open-Mesh OM2P-HS v2AtherosAtheros
Open-Mesh OM2P-HS v3AtherosAtheros
Open-Mesh OM2P-HS v4Qualcomm AtherosQualcomm Atheros
Open-Mesh OM2P-LCAtherosAtheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Open-Mesh devices with specifications, see Open-Mesh.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 21.02.0
Current supported version: 24.10.2

Please insert instructions here