OvisLink Evo-W311AR

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
wireless router
Evo-W311AR-case.jpg
WikiDevi.wi-cat.ru OvisLink Evo-W311AR
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev OvisLink Evo-W311AR
FCC ID (fcc.io) none specified
FCC ID (fcc.report) none specified
Type wireless router
CPU1 checkY Realtek RTL8196E
CPU1 Type Lexra RLX4181
CPU1 Speed 400 MHz
Flash1 Chip GigaDevice GD25Q16BSIG
Flash1 Size 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip Winbond W9812G6JH-6
ETH chip1 Realtek RTL8196E
Switch Realtek RTL8196E
Ethernet Port Count 1-100MbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 00:1D:1A (-, 8 W)
Ethernet OUI: 00:1D:1A (-, 8 W)

Expansion IF types none specified
Power 9 VDC, 0.5 A
Connector type barrel
Other

Default SSID: OvisLink
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 819 additional devices
of which 0 are OvisLink devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1352 additional devices
of which 0 are OvisLink devices

Retail
Availability End of Life
(Est.) release date 2012
(Est.) initial retail price (in USD): $20
Country of manuf China
Radio 1
Chip1 Realtek RTL8188ER
Wireless interface OUI 00:1D:1A
Antenna Connector Type RP-SMA
MIMO status 1x1:1
Wireless Standard IEEE 802.11b/g/n
802.11n up to 150 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented OvisLink devices with specifications, see OvisLink.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

JTAG-Serial Info

Serial

Serial Pinouts

  • baudrate: 38400
VCC TX RX GND
Boot log
Boot log
Booting...

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
@ 0000000h 0c84015h 00000c8h 0000040h 0000015h 0000000h 0000015h 0200000h
@ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
@ 0010000h 0000020h 0001000h 0000200h 0000100h 0000010h 000004eh GD25Q16
@ 
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 
---RealTek(RTL8196E)at 2012.07.06-04:36+0900 v0.4 [16bit](400MHz)
Delay 1 second till reset button
Magic Number: raw_nv 00000000
Check Firmware(05020000) : size: 0x001c3fc8 ---->[ OK ]
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
early printk enabled 
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock1 console=0 single
Calibrating delay loop... 398.95 BogoMIPS
Memory: 9500k/16384k available (2310k kernel code, 6884k reserved, 416k data, 60k init, 0k highmem)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
check_wait... unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Serial driver version 6.02 (2003-03-12) with no serial options enabled
ttyS00 at 0x2000 (irq = 5) is a rtl_uart1
state->flags=00000000
Realtek GPIO Driver for Flash Reload Default
Init IPTIME GPIO: 
block: 64 slots per queue, batch=16
PPP generic driver version 2.4.1
MPPE/MPPC encryption/compression module registered
SPI INIT
flash device: 0x200000 at 0xbd000000
probe realtek
capacity_id 15
capacity_id 15
get SPI CS0
maker:c8  type:40  sector_cnt:0

MXIC matched!!get SPI chip driver!
Physically mapped flash: Found an alies 0x200000 for the chip at 0x0, EON device detect.
probe ends
probe realtek2
Creating 2 MTD partitions on "Physically mapped flash":
0x00000000-0x00200000 : "boot+cfg+linux+rootfs"
0x000d0000-0x00200000 : "root fs"
RealTek E-Flash System Driver. (C) 2002 RealTek Corp.
Cannot find driver for DiskOnChip Millennium at 0x6000
Realtek WLAN driver - version 1.6 (2013-02-21)
 wlan_index:0  0, 134,0xb9000000,0xb8b10000,21
=====>>INSIDE rtl8192cd_init_one <<=====
PCIE reset (0) 
Do MDIO_RESET
98 - 25MHz Clock Source
Find Port=0 Device:Vender ID=817910ec
vendor_deivce_id=817910ec
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: after read tmpReg[0xe] 
Realtek 865x Ethernet driver v0.6 (Mar 26, 2008)
eth0: RTL865x-NIC at 0xbb804000, 00:00:00:00:00:11, IRQ 2
eth1: RTL865x-NIC at 0xbb804000, 00:00:00:00:00:22, IRQ 2
eth2: RTL865x-NIC at 0xbb804000, 00:e0:4c:f0:00:02, IRQ 2
eth3: RTL865x-NIC at 0xbb804000, 00:e0:4c:f0:00:03, IRQ 2
eth4: RTL865x-NIC at 0xbb804000, 00:e0:4c:f0:00:04, IRQ 2
=> rtl865x_ioctl init
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
==> create_proc_ipclone() form DEV.c 
ip_conntrack version 2.1 (512 buckets, 1024 max) - 384 bytes per conntrack
IPSEC netfilter connection tracking: registered
IPSEC netfilter NAT helper: NETDETECT target register
ip_nat_bnet: Trying to register for port 6112
FTP proc OK....
ip_ct_ftp: registering helper for port 21
ip_ct_ftp: # of port 1
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 60k freed
mount /proc file system ok!
mount /tmp  file system ok!
---> /sbin/init doing 
alias:w311ar version:8.76
Restore Config ( 4334 bytes )
etc/wireless.conf.wps.wlan0
etc/wireless.conf.wlan0
etc/udhcpd.leases
etc/udhcpd.conf
etc/services
etc/resolv.conf
etc/pptpd.conf
etc/ppp
etc/ppp/options.pptpd
etc/passwd
etc/miniupnpd.conf
etc/mime.types
etc/messages
etc/ippool.set
etc/ippool.conf
etc/igmpproxy.conf
etc/iconfig.cfg
etc/httpd.passwd
etc/hosts
etc/group
etc/fwsched_netfilter.set
etc/fwsched.set
etc/defaultip
Set WAN PORT



=================================================================
press magic key to change default setting ...
  LAN MAC : 00:1D:1A:13:E9:28
  WAN MAC : 00:1D:1A:13:E9:29
Bridge Init
device wlan0-va0 is not a slave of br0
device wlan0-va1 is not a slave of br0
device wlan0-va2 is not a slave of br0
Interface doesn't accept private ioctl...
set_mib (89F1): Operation not permitted
iptables: Bad rule (does a matching rule exist in that chain?)
iptables: No chain/target/match by that name
Jan  1 00:00:11 miniupnpd[197]: Reloading rules from lease file
Jan  1 00:00:11 miniupnpd[197]: could not open lease file: /var/run/upnp_pmlist
Jan  1 00:00:11 miniupnpd[197]: HTTP listening on port 2048
PPTP Server Start!!
insmod: not found
killall: iapp: no process killed
killall: wscd: no process killed
killall: iwcontrol: no process killed
SIGNAL -> Config Update signal progress
Check DHCP PID Elapsed Time: 1
killall: pppoe-relay: no process killed
SIGNAL -> WAN ip changed
Reaped 223
Reaped 212
Reaped 196
Reaped 195
iptables: Bad rule (does a matching rule exist in that chain?)

To enter into the bootloader failsafe CLI press the ESC key when booting up the device.

Booting...
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
@ 0000000h 0c84015h 00000c8h 0000040h 0000015h 0000000h 0000015h 0200000h
@ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
@ 0010000h 0000020h 0001000h 0000200h 0000100h 0000010h 000004eh GD25Q16
@ 
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 
---RealTek(RTL8196E)at 2012.07.06-04:36+0900 v0.4 [16bit](400MHz)
Delay 1 second till reset button
Magic Number: ����nv 00000000
Check Firmware(05020000) : size: 0x001c3fc8 ---->[ OK ]

---Escape booting by user
P0phymode=01, embedded phy

---Ethernet init Okay!
<RealTek>
Unknown command !
<RealTek>?
----------------- COMMAND MODE HELP ------------------
HELP (?)                                    : Print this help message
DB <Address> <Len>
DW <Address> <Len>
EB <Address> <Value1> <Value2>...
EW <Address> <Value1> <Value2>...
CMP: CMP <dst><src><length>
IPCONFIG:<TargetAddress>
AUTOBURN: 0/1
LOADADDR: <Load Address>
J: Jump to <TargetAddress>
FLR: FLR <dst><src><length>
FLW <dst_ROM_offset><src_RAM_addr><length_Byte> <SPI cnt#>: Write offset-data to SPI from RAM
MDIOR:  MDIOR <phyid> <reg>
MDIOW:  MDIOW <phyid> <reg> <data>
PHYR: PHYR <PHYID><reg>
PHYW: PHYW <PHYID><reg><data>
PORT1: port 1 patch for FT2
<RealTek>


Make a backup
  • In the bootloader CLI execute the command:
    flr 80500000 0 200000
  • In your computer execute the command:
    tftp 192.168.1.6 -m binary -c get flash-backup.bin

This is a backup made with this procedure: w311ar-flash-backup.zip

Pictures

User Images