PC-Engines APU6B4
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
|
| |
| Homepage | Product page |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | PC-Engines APU6B4 |
| Type | single-board computer |
| CPU1 | AMD GX-412TC |
| CPU1 Speed | 1.0 GHz ( 4 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 0 MiB 0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (SD) |
| RAM1 Size | 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Intel i210IS |
| ETH chip2 | Intel i211AT |
| ETH chip3 | Intel i211AT |
| ETH chip4 | Intel i211AT |
| Ethernet Port Count | 3-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader | Coreboot |
| Expansion IF types | SD, Mini PCIe, SIM, SATA, mSATA, USB 3.0 |
| SIM Card slot | 1 |
| Mini PCIe slots | 3 |
| USB ports | 2 |
| SD/MMC Slots | 1 |
| SATA Ports | 2 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 2 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 5V TTL, (115200 8N1) |
| JTAG Port | yes |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented AMD chipsets with specifications, see AMD.
For a list of all currently documented Intel chipsets with specifications, see Intel.
For a list of all currently documented PC-Engines devices with specifications, see PC-Engines.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: x86
OpenWrt Subtarget: 64
OpenWrt Package architecture: x86_64
Support started version: 23.05.0
Current supported version: 24.10.4
OpenWrt Subtarget: 64
OpenWrt Package architecture: x86_64
Support started version: 23.05.0
Current supported version: 24.10.4
Please insert instructions here