PESI WA222M

b (B11)
access point, bridge
WikiDevi.wi-cat.ru	PESI WA222M
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	PESI WA222M
FCC ID	PQP-WA222M
Type	access point, bridge
CPU1	ShareWave Model?
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Chip	ICSI IC42S16100-7T x 2
ETH chip1	ShareWave Model?
ETH chip2	F3 FH3308
Ethernet Port Count	2-10MbE-LAN
Wired Standard	IEEE 802.3i
802dot11 OUI: none specified
Expansion IF types	USB (unk. standard - slave)
Power	5 VDC, 2 A
Connector type	barrel
Retail
Availability	unreleased?
FCC approval date	03 July 2002
Physical
Dimensions	163 mm x 89 mm x 55 mm
Radio 1
Chip1	ShareWave Model?
Chip2	RFMD RF3000
Chip3	RFMD RF2948B
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

F3 not currently documented.
For a list of all currently documented RFMD (Qorvo) chipsets with specifications, see RFMD.
For a list of all currently documented Cirrus Logic (ShareWave) chipsets with specifications, see Cirrus Logic.

For a list of all currently documented PESI device with specifications, see PESI.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"PCB-SW2250-A" is silkscreened on the board in the FCC photos.

There is a F3 FH3308 10Mbit hub chip (I think) on the board.

Per the manual...

• Configuration likely must be done via USB
• This device would appear to been used / targeted for use with a DCT-5000, whatever that is
• The sample SSID shown is fortune. The sample MAC shown w/ ShareWave's utilities has a 00:D0:6C (ShareWave) OUI.

Additional specifications, per the FCC manual, follow...

• Receive Sensitivity: -85 dBm typ., -83 dBm min.
• Dimensions: 163 mm x 89 mm x 55 mm