PRO-NETS RT514C
From TechInfoDepot
Jump to navigationJump to search
| router | |
| WikiDevi.wi-cat.ru | PRO-NETS RT514C |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Incompatible |
| OpenWrt | Incompatible |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | PRO-NETS RT514C |
| Type | router |
CPU1  | IC+ IP3210 |
| CPU1 Speed | 150 MHz |
| Flash1 Chip | Eon EN25F80-100HCP |
| Flash1 Size | 1 MiB 1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> |
| RAM1 Size | 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| RAM1 Chip | PieceMakers PMS304216LTR-6CN |
| ETH chip1 | IC+ IP3210 |
| Switch | IC+ IP3210 |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
| Stock FW OS | eCos |
| Expansion IF types | none specified |
| Power | 12 VDC, 1 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 5-pin header, unpopulated, 3.3V TTL, J2 |
| JTAG Port | yes, 14-pin header, unpopulated, pinout marked, JP2 |
|
| |
|
Additional chips | |
| Other | |
|
Default IP address: 192.168.1.1 | |
| Manuf/OEM/ODM | PRO-NETS |
| Retail | |
| (Est.) release date | June 2009 |
| ASIN |
B004HJDY1C  |
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented PRO-NETS devices with specifications, see PRO-NETS.
Overview
"G1700814100200 V2.0 REV:B" and a date code of 2209 is silkscreened on one RT514C's board.
- There is no obvious indicator RT514C is the PRO-NETS model of this device.
- However, it's on the label affixed to the device.. not with any indicator that it is the model name, but it seems to be.
- All caps on the board are JACKCON branded.
It would appear to be running eCos.
Included PSU(s)
The power supply included with the device (in at least US regions)
- looks to be a Channel Well Technology CAP012121.
| Channel Well Technology CAP012121 (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC ~ 43-63 Hz, 0.35 A | |||||
| Input connector: NEMA 1-15P Style: medium, horiz. Eff. level: 5 | |||||
| Output: 12 VDC, 1 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||
JTAG-Serial Info
Serial
Info derived from
| boot log • >> |
|---|
A camelot_phy_down...LAN_PORT(0-3) camelot_phy_down...WAN_PORT(4) Camelot booting.. cmd_init 21 cmds at 80fef4ac Isolated CPU,WAN port Forward CPU port ▒WDOG CTRL=0000000f cpu freq=150 Mhz bus freq=150 Mhz a3005020=55555555 a3005024=95555555 a3005028=00000555 Loading flash.. Press any key to stop. loading 0x60000 bytes from bfc20000 to 0x80140000 ..............img unz len=994040(0xf2af8) camelot_phy_up...LAN_PORT(0-3) camelot_phy_up...WAN_PORT(4) Go 0x80000100!!! undo WAN port isolation camelot_phy_up...LAN_PORT(0-3) camelot_phy_up...WAN_PORT(4) +Memory initial free size:1098720 cdb_flash.firmware_ofs = 20000 [CDB] boot=3000 cdb=10000/10000 img=20000/60000 cml_eth_hwinit MSMS=1000 GPIO SWRST bit=0001 flash0 base:bfc00000 id:1c31141c sz:100000 flash1 base:bf000000 id:34343434 sz:80000 total size=180000 board_srand_init ++++ rand()=246f28d4 CLI>GPIO SWRST bit=0001 [LOG] allocte memory size=8192 ~~~~~~~~SIOCSFC off ifmgt_eth_diag_start : start www start address:0 qos_dscp_update! qos_portbase_update! [00000015]System Ver RT 2.3 p11 #12 Wed Apr 28 14:46:48 2010 evt_send<0x8000513c> ==> recv evt:2, e.ifname=eth0 cml_eth_phy_up...LAN_PORT(0-3) ifmgt_connected(538), ifname=eth0 evt_send<0x80046984> ==> recv evt:22, e.ifname= cml_eth_hwinit MSMS=1000 cml_eth_hwinit MSMS=1000 **************************** eth0 mode : STATIC IP: 192.168.1.1 MASK: 255.255.255.0 Gateway: 0.0.0.0 Domain: (null) **************************** evt_send<0x80004568> ==> recv evt:4, e.ifname=eth0 igmp_proxy_update www start address:bfc63fa4 DNS start, ver 1.17 cachesize 300 |
