2Wire 5012NV

bgn (N300)
wireless router, dsl modem, analog phone gateway
Wikipedia	2Wire
WikiDevi.wi-cat.ru	2Wire 5012NV
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Status Unknown
Platform
Brand • Model • Rev	2Wire 5012NV-002
FCC ID	PGR2W5012NV
IC ID	3439B-5012NV
US ID	6KRDL02BTW5012NV
Type	wireless router, dsl modem, analog phone gateway
CPU1	Broadcom BCM6367
CPU1 Type	BMIPS4350
CPU1 Speed	240 MHz ( 2 cores )
Flash1 Chip	STMicro NAND256W3A2BN6
Flash1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	Zentel A3S56D40FTP-G5 x 2
ETH chip1	Broadcom BCM6367
ETH chip2	Broadcom BCM54610
ETH chip3	Broadcom BCM54610
Ethernet Port Count	1-1GbE-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	U-Boot 1.3.3
Stock FW OS	Linux 2.6.21.5
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	14.5 VDC, 2.48 A
Connector type	barrel
Serial Port (UART)	yes, 4-pin header, internal, JP4
Flags: ADSL2+
Additional chips 2.4GHz Power Amplifier IC;Skyworks;SE2605L;SiGe, 2605L, 019DX;2;
Other
Default IP address: 192.168.1.254 the IP 192.168.1.254 is used by 157 additional devices of which 5 are 2Wire devices
Manuf/OEM/ODM	Arcadyan ARV7539S W22-A-LF
Retail
FCC approval date	16 July 2010
Radio 1
Chip1	Broadcom BCM43222
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented 2Wire device with specifications, see 2Wire.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

This device may have a GbE WAN, 1x GbE and 3x FE LAN port..

The default SSID format may be the standard 2Wire format - 2WIRE followed by the last three digits of the gateway S/N.. but the manual sample value follows a format of 2Wire-XXX

This router would appears to have used with SingTel's broadband service.

SSID format w/ SingTel's routers may follow the format of SINGTEL-XXXX.

System Information

• Manufacturer: 2Wire
• Model: 5012NV-002
• Serial Number: 09111A0210XX (last 2 digits obfuscated)
• Hardware Version: 2701-000808-004
• Software Version: 9.3.1.25 (may not be current version)
• Key Code: 52AD-2AD4-6266-22NA-B27M
• First Use Date: 2011 -04-12T07:39:29-08:00
• DSL Modem A2pC030g.d22k
• System Password: None

Chipset markings

Chipsets

Soc Broadcom BCM6367KPBG UG1050 P22 113438 B1 RAM (x2) (32MB DDR SDRAM) Zentel A3s56D40FTP -G5 TAIWAN A41ABF09 Flash (sticker) ARV7539SW22-A-LF -LW SingTel-5012-A MU34 9CDC V9.3.1.25_1.1.30.25 Flash (chip markings) ST NAND256W3A2BN6 99AK6 S MYS 99 Wlan Broadcom BCM43222KFBG CA1031 P10 989950 N1 2.4GHz Amplifier (x2) SiGe 2605L 019DX 26 dBm, EVM = 3%, 802.11g, OFDM 54 Mbps 29 dBm, ACPR < -32 dBc, 802.11b Gigabit Copper Transceiver (x2) Broadcom BCM54610C1KMLG UE1042 P31 102704 3

Hidden URL

• http://192.168.1.254/singtel

password techsupport

Enable bridge mode by unchecking routing.

JTAG-Serial Info

Serial

Serial Pinouts

• Connector: JP4
• Pinouts:
  • 1 - Vcc
  • 2 - tx
  • 3 - rx
  • 4 - GND
• Speed: 115200

Serial Output

Bootup

U-Boot 1.3.3 (Jun 14 2011 - 23:53:14) CPU: Broadcom BCM6338 v3.1 at 240 MHz: 16 kB I-Cache 8 kB D-Cache BOARD: 2Wire Broadcom BCM96368 DRAM: 64 MB NAND: NAND device: Manufacturer ID: 0x20, Chip ID: 0x75 (ST Micro NAND 32MiB 3,3V 8-bit) 32 MiB OOB[1/16384]55 69 56 69 ff ff 99 a6 42 6f 6f 74 43 6f 64 65 OOB[2/32768]66 a9 96 96 ff ff 6a a6 42 6f 6f 74 43 6f 64 65 OOB[3/49152]6a 59 5a 59 ff ff 95 66 42 6f 6f 74 43 6f 64 65 OOB[4/65536]96 a9 a6 a6 ff ff 56 6a 42 6f 6f 74 43 6f 64 65 OOB[5/81920]ff ff f 56 ff ff a9 aa 42 6f 6f 74 43 6f 64 65 OOB[6/98304]f0 cc 3f ff ff ff 3f ff 42 6f 6f 74 43 6f 64 65 OOB[7/114688]56 99 6a 3f ff ff cf 33 42 6f 6f 74 43 6f 64 65 OOB[8/131072]56 66 56 aa ff ff 55 56 42 6f 6f 74 43 6f 64 65 OOB[9/147456]cf c f 99 ff ff 6a 9a 42 6f 6f 74 43 6f 64 65 OOB[10/163840]a6 59 66 a9 ff ff 65 96 42 6f 6f 74 43 6f 64 65 OOB[11/180224]66 5a 96 a6 ff ff a5 6a 42 6f 6f 74 43 6f 64 65 OOB[12/196608]fc f0 c3 f3 ff ff f0 3 42 6f 6f 74 43 6f 64 65 OOB[13/212992]95 a5 6a f0 ff ff 3 cf 42 6f 6f 74 43 6f 64 65 OOB[14/229376]33 0 33 30 ff ff 3 f3 42 6f 6f 74 43 6f 64 65 OOB[15/245760]59 aa 96 ff ff ff c0 c3 42 6f 6f 74 43 6f 64 65 OOB[16/262144]96 5a 56 ff ff ff 3f f3 42 6f 6f 74 43 6f 64 65 OOB[17/278528]fc 3f f3 f3 ff ff f3 cf 42 6f 6f 74 43 6f 64 65 OOB[18/294912]cf f0 3f a5 ff ff 59 aa 42 6f 6f 74 43 6f 64 65 OOB[19/311296]3 f 33 a9 ff ff 65 a6 42 6f 6f 74 43 6f 64 65 OOB[20/327680]fc c0 f f ff ff f f3 42 6f 6f 74 43 6f 64 65 OOB[21/344064]fc 3f cf 66 ff ff 95 5a 42 6f 6f 74 43 6f 64 65 OOB[22/360448]65 95 96 65 ff ff 65 9a 42 6f 6f 74 43 6f 64 65 OOB[23/376832]55 56 6a 56 ff ff 9a 5a 42 6f 6f 74 43 6f 64 65 OOB[24/393216]0 ff 3f c ff ff f0 33 ff ff ff ff ff ff ff ff OOB scan: Found pattern mismatch at 24/393216 Fixed up MTD partition to mtdparts=mtd-0:393216(loader),-(ubipart) Creating 1 MTD partitions on "nand0": 0x00060000-0x02000000 : "mtd=1" Scanning device for bad blocks UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 16384 bytes (16 KiB) UBI: logical eraseblock size: 15872 bytes UBI: smallest flash I/O unit: 512 UBI: sub-page size: 256 UBI: VID header offset: 256 (aligned 256) UBI: data offset: 512 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=1" UBI: MTD device size: 31 MiB UBI: number of good PEBs: 2024 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 92 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 4 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 2024 UBI: number of PEBs reserved for bad PEB handling: 20 UBI: max/mean erase counter: 5989/5098 UBI env volume info: U-Boot Environment, sizes=81920/79360 led_start=512 Volume U-Boot Environment found at volume id 0 read 64512 bytes from volume 0 to 83fdf7bc(buf address) env dump -----b7 c0 27 6 0 62 6f 6f 74 63 6d 64 3d 75 62 69 66 73 6d 6f 75 6e 74 20 52 6f 6f 74 66 73 3b 75 UBI env volume info: U-Boot Environment CRC=b7c02706/b7c02706 env_size=64507 UBI env volume info: Backup U-Boot Environment, sizes=81920/79360 led_start=512 Volume Backup U-Boot Environment found at volume id 1 read 64512 bytes from volume 1 to 83fdf7bc(buf address) env dump -----b7 c0 27 6 0 62 6f 6f 74 63 6d 64 3d 75 62 69 66 73 6d 6f 75 6e 74 20 52 6f 6f 74 66 73 3b 75 UBI env volume info: Backup U-Boot Environment CRC=b7c02706/b7c02706 env_size=64507 In: serial Out: serial Err: serial BpSetBoardId: Setting GPIO overlays.... Board Id : 2701-000808-004 Net: br0 Hit any key to stop autoboot: 0 UBIFS: lebsize=15872 min=3 max_bud=126976 main=1971 MIN=9 UBIFS: recovery needed UBIFS: recovery deferred UBIFS: mounted UBI device 0, volume 3, name "Rootfs" UBIFS: mounted read-only UBIFS: file system size: 31283712 bytes (30550 KiB, 29 MiB, 1971 LEBs) UBIFS: journal size: 190464 bytes (186 KiB, 0 MiB, 12 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: no compression UBIFS: reserved for root: 0 bytes (0 KiB) <DIR> 3312 Thu May 12 16:00:57 2011 rw <DIR> 160 Wed Jun 15 07:11:54 2011 bcm <DIR> 160 Wed Jun 15 07:11:54 2011 opt <DIR> 160 Sat Jan 01 00:02:12 2000 tmp <DIR> 384 Wed Jun 15 07:12:13 2011 sys1 <DIR> 160 Sat Jan 01 00:02:12 2000 sys2 50 Thu May 12 16:01:30 2011 sw_factory_reset_done <DIR> 160 Sat Jan 01 00:00:13 2000 config 25 Thu May 12 16:03:07 2011 hw_reset_factory_done Loading file '/sys1/uImage' to addr 0x80400000 with size 1391486 (0x00153b7e)... Done Upgrade Image present. Checking image integrity ## Checking Image at 80400000 ... Legacy image found Image Name: Linux-2.6.21.5-9.3.1.29 Created: 2011-05-13 4:55:15 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1391422 Bytes = 1.3 MB Load Address: 80010000 Entry Point: 8030d000 Verifying Checksum ... OK Valid Image Found ## Booting kernel from Legacy Image at 80400000 ... Image Name: Linux-2.6.21.5-9.3.1.29 Created: 2011-05-13 4:55:15 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1391422 Bytes = 1.3 MB Load Address: 80010000 Entry Point: 8030d000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel commandline=console=ttyS0,115200 ubi.mtd=ubipart rdinit=/init mtdparts=mtd-0:393216(loader),-(ubipart) 5,a3b5c3b0,a3b5c810... Linux version 2.6.21.5-9.3.1.29 (bslave1@buildbot) (gcc version 3.4.3) #3 Fri May 13 10:25:13 IST 2011 Flash SPI: got c210 Flash SPI: num_sectors=1 sectorsize=65536 flash init: Bringing up SPI as boot flash:1 flash init: Boot flash init done, bringing up data flash... Boot Serial flash device: name MX25L512, id 0xc210 size 64KB EraseSize:65536B @@@@ Setting cs base=1a000000 config=1 MPINAND device: Vendor ID: 0x20, Chip ID: 0x75 block: 16384 page: 512 name: NAND 32MiB 3,3V 8-bit >> nand_scan_part - Total 0 bad and 2048 good blocks found flash init: Bringing up MPI as data flash:1 Found a secondary flash of type 5 Data MPI NAND flash device: name NAND 32MiB 3,3V 8-bit, id 0x2075 Going to setup data flash.... Switching to MPI NAND flash:1 MPI NAND: Reading page 0 ba000000 MPI NAND: Reading page 1 ba000000 MPI NAND: Reading page 2 ba000000 MPI NAND: Reading page 3 ba000000 MPI NAND: Reading page 4 ba000000 MPI NAND: Reading page 5 ba000000 MPI NAND: Reading page 6 ba000000 MPI NAND: Reading page 7 ba000000 MPI NAND: Reading page 8 ba000000 MPI NAND: Reading page 9 ba000000 MPI NAND: Reading page 10 ba000000 MPI NAND: Reading page 11 ba000000 MPI NAND: Reading page 12 ba000000 MPI NAND: Reading page 13 ba000000 MPI NAND: Reading page 14 ba000000 MPI NAND: Reading page 15 ba000000 kerSysEarlyFlashInit: NVRAM size=8188 CRC 363ab401 363ab401 2701-000808-004 prom init Linux TP ID = 0 CPU revision is: 0002a031 Determined physical RAM map: memory: 03f00000 @ 00000000 (usable) Initrd not found or empty - disabling initrd On node 0 totalpages: 16128 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 94 pages used for memmap Normal zone: 11938 pages, LIFO batch:1 Built 1 zonelists. Total pages: 16002 Kernel command line: console=ttyS0,115200 ubi.mtd=ubipart rdinit=/init mtdparts=mtd-0:393216(loader),-(ubipart) brcm mips: enabling icache and dcache... Primary instruction cache 64kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 32kB, 2-way, linesize 16 bytes. Synthesized TLB refill handler (21 instructions). Synthesized TLB load handler fastpath (33 instructions). Synthesized TLB store handler fastpath (33 instructions). Synthesized TLB modify handler fastpath (32 instructions). PID hash table entries: 256 (order: 8, 1024 bytes) Using 200.000 MHz high precision timer. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Allocating memory for DSP module core and initialization code Allocated DSP module memory - CORE=0x8108c760 SIZE=1573552, INIT=0x0 SIZE=0 Memory: 58608k/64512k available (2413k kernel code, 5888k reserved, 642k data, 392k init, 0k highmem) KLOB Pool 1 Initialized: 1048576 bytes <0x80c00000 ... 0x80d00000> Calibrating delay loop... 398.33 BogoMIPS (lpj=199168) Mount-cache hash table entries: 512 wait instruction: enabled NET: Registered protocol family 16 *** kerSysFlashInit .... registering PCI controller with io_map_base unset SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb BLOG v2.1 Initialized NET: Registered protocol family 8 NET: Registered protocol family 20 Time: MIPS clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher squashfs: LZMA suppport for slax.org by jro io scheduler noop registered (default) loop: loaded (max 8 devices) PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 NAND device: Manufacturer ID: 0x20, Chip ID: 0x75 (ST Micro NAND 32MiB 3,3V 8-bit) Scanning device for bad blocks 2 cmdlinepart partitions found on MTD device mtd-0 Creating 2 MTD partitions on "mtd-0": 0x00000000-0x00060000 : "loader" 0x00060000-0x02000000 : "ubipart" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 16384 bytes (16 KiB) UBI: logical eraseblock size: 15872 bytes UBI: smallest flash I/O unit: 512 UBI: sub-page size: 256 UBI: VID header offset: 256 (aligned 256) UBI: data offset: 512 UBI: attached mtd1 to ubi0 UBI: MTD device name: "ubipart" UBI: MTD device size: 31 MiB UBI: number of good PEBs: 2024 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 92 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 4 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 2024 UBI: number of PEBs reserved for bad PEB handling: 20 UBI: max/mean erase counter: 5989/5098 UBI: background thread "ubi_bgt0d" started, PID 594 PCI: Enabling device 0000:00:0a.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:00:0a.0 to 64 ehci_hcd 0000:00:0a.0: EHCI Host Controller ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0a.0: irq 15, io mem 0x10001500 ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver hub 1-0:1.0: over-current change on port 2 PCI: Enabling device 0000:00:09.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:00:09.0 to 64 ohci_hcd 0000:00:09.0: OHCI Host Controller ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:09.0: irq 13, io mem 0x10001600 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. brcmboard: brcm_board_init entry SES: Button Interrupt 0x2 is enabled In EnableUSBPower Serial: BCM63XX driver $Revision: 3.00 $ ttyS0 at MMIO 0xb0000100 (irq = 10) is a BCM63XX ttyS1 at MMIO 0xb0000120 (irq = 11) is a BCM63XX bcmxtmrt: Broadcom BCM6368B2 ATM/PTM Network Device v0.3 May 13 2011 10:11:53 IPSEC SPU: SUCCEEDED u32 classifier input device check on Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (504 buckets, 4032 max) ctnetlink v0.93: registering with nfnetlink. Ah4 module with HW offload netfilter PSD loaded - (c) astaro AG ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Initializing MCPD Module Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> Freeing unused kernel memory: 392k freed UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 3, name "Rootfs" UBIFS: file system size: 31283712 bytes (30550 KiB, 29 MiB, 1971 LEBs) UBIFS: journal size: 190464 bytes (186 KiB, 0 MiB, 12 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: none UBIFS: reserved for root: 0 bytes (0 KiB) Integrity checks Cleaning up Booting from sys1 mount /mnt/sys1/target-mips.squashfs.img /ro -t squashfs -o loop mount /mnt/ /ro/mnt -o move exec switch_root /ro /sbin/init switch_root : Change to new root directory. switch_root : D Do execve: filename = /sbin/init eleted contents on / switch_root : Mounted new root on / switch_root : Calling init from new root : Process = /sbin/init Init : Starting init Init : Doing console init Init : console init done Starting Config update check: done. pktflow: module license 'Proprietary' taints kernel. Broadcom Packet Flow Cache Char Driver v2.1 Oct 18 2010 12:06:13 Registered<242> NBUFF v1.0 Initialized Broadcom Packet Flow Cache learning via BLOG enabled. Created Proc FS /procfs/fcache Broadcom Packet Flow Cache registered with netdev chain Constructed Broadcom Packet Flow Cache v2.1 Oct 18 2010 12:06:12 Broadcom Packet CMF (Experimental) Char Driver v0.1 May 24 2010 10:40:45 Registered<232> Broadcom Packet CMF (Experimental) [6368-B2] v0.1 May 24 2010 10:40:45 Loaded robosw_configure_ports: configuring.... Broadcom BCM6368B2 Ethernet Network Device v0.1 May 13 2011 10:11:20 KLOB extended to 2 pools KLOB extended to 3 pools KLOB extended to 4 pools KLOB extended to 5 pools KLOB extended to 6 pools KLOB extended to 7 pools KLOB extended to 8 pools dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered Broadcom Packet CMF (Experimental) SWC RESET. Broadcom Packet CMF (Experimental) SWC INITIALIZED. Broadcom Packet CMF (Experimental) Forwarder Net Device 0 v0.1 May 24 2010 10:40:46 Registered Broadcom Packet CMF (Experimental) Forwarder Net Device 0 v0.1 May 24 2010 10:40:46 Registered Broadcom Packet CMF (Experimental) ENABLED. eth0: MAC Address: 64:0F:28:56:01:69 eth1: MAC Address: 64:0F:28:56:01:69 eth2: MAC Address: 64:0F:28:56:01:69 eth3: MAC Address: 64:0F:28:56:01:69 eth4: MAC Address: 64:0F:28:56:01:69 eth5: MAC Address: 64:0F:28:56:01:69 --------------ENET probe--------------------- ENET: PERF enables=4ff80 GPIO robosw=903c0 --------------------------------------------- bcmxtmcfg: bcmxtmcfg_init entry adsl: adsl_init entry PCI: Enabling device 0000:00:01.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:00:01.0 to 64 wl: srom not detected, using main memory mapped srom info (wombo board) @@@@ kerSysGetWlanSromParams:No default wireless calibration data wl0: wlc_attach: MAC addr from system pool. id:0x776c0000 wl0: MAC Address: 64:0F:28:56:01:6A wl0: Broadcom BCMa8d6 802.11 Wireless Controller 5.10.120.0.cpe4.404.8 dgasp: kerSysRegisterDyingGaspHandler: wl0 registered DSP Driver: DSP init stub Endpoint: endpoint_init entry PROV(ts: 12s 217ms):Allocated memory = 34260 Endpoint: endpoint_init COMPLETED Starting networking: done. Starting Generating interface-to-MAC map: done. Starting initialising interfaces: done. Starting Initialising Dsl Driver: Do execve: filename = /usr/sbin/init_ioctls BcmAdsl_Initialize=0xC0121AE8, g_pFnNotifyCallback=0xC014BE64 Clocks for QPROC and AFE are being aligned with step through ... AFE is aligned, i = 034, PhaseValue = -050, PhaseCntl = 0x3FDE0000 QPROC is aligned, i = 045, PhaseValue = 0050, PhaseCntl = 0x3FDE402D Clocks for QPROC and AFE are aligned with syn_status AFE = 0x70, QPROC = 0x78 AFE phase control reg @0xb0f570f8 default actual = 0x0021C38F, exp = 0x0021c38f QPRC phase control reg @0xb0f5f0c0 default actual = 0x0421C38F, exp = 0x0421c38f pSdramPHY=0xA3FFFFF8, 0xF0F0F0F 0xF0F0F0F AdslCoreSharedMemInit: shareMemAvailable=482848 AdslCoreHwReset: AdslOemDataAddr = 0xA3F6A6C4 dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered done. Starting Starting Syslog: done. Starting Event Manager: done. Starting SSH key generator: done. Starting creating map: done. Starting Firewall Init: done. Starting Ethernet Bridge Tables Init: done. Starting Configuration Provisioning: done. Starting Switch WAN port routing: done. Starting AIM daemon: done. Starting system_status_monitor daemon: done. Starting monit daemon: done. No Crash-Dump present. Welcome to 2Wire Network Persona(TM) Linux(R) 9.3.1.29 Kernel: 2.6.21.5-9.3.1.29 CPU: mips (none) login:

Info dump of Singtel's 2wire 5012NV-002

WAN & LAN1 ports are GE, while LAN2-4 are 10/100Mbps ports

S/N 09111A0210XX (last 2 digits obfuscated)
(manufactured week 9, year 2011 (look at first 4 digits of serial no.))

P/N 4201-006007-002
MAC 98:2C:BE:75:08:XX (last 2 chars obfuscated)

SSID: SINGTEL-1010
Wireless Key: 6475405623

5012NV-002
ARC
Customer Care Hotline 1688
2Wire(R) Gateway
www.2wire.com

Complies with
IDA Standards
DA103787

Electrical Rating
14.5V dc 2.5A
Made in China

Pictures

More photos at Jeffrey Tan Jian Wei's blog

User Images

• 

  PCBA top

• 

  Flash chip (bottom of PCBA)

• 

  Closeup of wifi & RF area