Pirelli PRG AV4202N
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
|---|---|
| Cyta Router | |
 | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Status Unknown |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Pirelli PRG AV4202N |
| FCC ID |
none specified |
| Type |
wireless router, dsl modem |
| CPU1 |
Broadcom BCM6368 |
| CPU1 Type |
BMIPS4350 |
| CPU1 Speed |
400 MHz ( 2 cores ) 32-bit |
| Flash1 Chip |
Spansion S29GL128P |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Broadcom BCM6368 |
| Switch |
Broadcom BCM6368 |
| Ethernet Port Count |
4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader |
CFE |
| Expansion IF types |
USB 2.0 |
| USB ports |
2 |
| USB Hub Compatible |
Untested |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 3.3, (115200 8N1) |
| JTAG Port |
yes |
|
Flags: xDSL | |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| Radio 1 | |
| Chip1 |
Broadcom BCM4322 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio cor_rev |
16 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
See also: ADB P.DG AV4202N
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | DSL will not work at all on devices with BCM63xx DSL chipset (due to unavailability of FLOSS driver for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom DSL, Unsupported: DSL modem and Broadcom BCM63xx for details. |
| This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: bcm63xx
OpenWrt Subtarget: smp
OpenWrt Package architecture: mips_mips32
Support started version: 18.06.0
Current supported version: 23.05.5
Unsupported Functions:
DSL modem, FXS, WiFi 2.4GHz partly
On the OpenWrt Wiki
OpenWrt Target: bcm63xx
OpenWrt Subtarget: smp
OpenWrt Package architecture: mips_mips32
Support started version: 18.06.0
Current supported version: 23.05.5
Unsupported Functions:
DSL modem, FXS, WiFi 2.4GHz partly
Please insert instructions here
Categories:
- Pirelli
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Broadcom
- Embedded System BCM6368
- Broadcom
- Embedded System BMIPS4350
- Embedded System
- OpenWrt Supported
- Embedded System BCM4322
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
