Planex MZK-W300NH
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
|---|---|
| 802.11n Draft 2.0 Wireless Broadband Router | |
 | |
| Homepage | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Planex MZK-W300NH |
| FCC ID | |
| Type |
wireless router |
| CPU1 |
Atheros AR9130 |
| CPU1 Type |
MIPS 24K |
| CPU1 Speed |
400 MHz |
| Flash1 Chip |
STMicro 25P64V6P |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
SK hynix HY5DU561622FTP-D43 |
| ETH chip1 |
Atheros AR9130 |
| Switch |
Atheros AR8216 |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| Power |
5 VDC, 2.5 A |
| Connector type |
barrel |
| Other | |
|
Default IP address: 192.168.1.1 | |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| FCC approval date | 23 April 2008 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Atheros AR9130 |
| Chip2 |
Atheros AR9102 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Planex device with specifications, see Planex.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
This device appears to be another OEM Cameo AP81 product. It looks very similar to the TRENDnet TEW-632BRP.
The default SSID is probably planexuser.
Links of Interest
Manual
On the OpenWrt wiki
On the OpenWrt forums
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
Support started version: 10.03
Current supported version: 19.07.10
On the OpenWrt Wiki
Support started version: 10.03
Current supported version: 19.07.10
Please insert instructions here
Categories:
- Planex
- Embedded system/wireless router
- Embedded System Atheros
- Embedded System AR9130
- Atheros
- Embedded System MIPS 24K
- Embedded System
- Embedded System AR8216
- Manuf Cameo
- OpenWrt Supported
- Embedded System AR9102
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
