Planex VR500

From TechInfoDepot
Jump to navigationJump to search
SAKOKU 500
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Planex VR500
Type router
CPU1 checkY MediaTek MT7621A
CPU1 Type MIPS 1004Kc
CPU1 Speed 880 MHz ( 2 cores ) 16-bit
Flash1 Chip Brand? Model?
Flash1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 MediaTek MT7621A
Switch MediaTek MT7621A
Ethernet Port Count 1-1GbE-WAN
4-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab
Stock bootloader U-Boot
Expansion IF types USB 2.0, USB 3.0
USB ports 2
USB Hub Compatible Untested
Power 12 VDC, 1 A
Connector type barrel
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Planex devices with specifications, see Planex.

Flashing

Flashing OpenWrt

Target: ramips
Subtarget: mt7621
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 17.01.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7621A
WLAN Hardware: none
Installation method(s):
unknown
git • >>
ramips: add support for Planex VR500.
SOC:	MT7621A
RAM:	256MiB
NOR:	MX25L51245G

Non Wireless Router.

Issue: soft reboot problem. SPI Flash do not exit 4byte address mode.

Signed-off-by: Yuhei Okawa