Popcorn Computer PopStick
From TechInfoDepot
Jump to navigationJump to search
| USB-Connected PopStick SBC | |
|
| |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Popcorn Computer PopStick |
| Type | single-board computer |
| CPU1 | Allwinner F1C100S |
| CPU1 Speed | 408 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip | Brand? Model? |
|
| |
| Stock bootloader | U-Boot |
| Expansion IF types | USB OTG |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Connector type | USB (Type-A Male) |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: sunxi
OpenWrt Subtarget: arm926ejs
OpenWrt Package architecture: arm_arm926ej-s
Support started version: unknown
Current supported version: snapshot
OpenWrt Subtarget: arm926ejs
OpenWrt Package architecture: arm_arm926ej-s
Support started version: unknown
Current supported version: snapshot
WLAN Hardware: none
Please insert instructions here