prpl Foundation Haze (WNC LVRP)

From TechInfoDepot
Jump to navigationJump to search
abgn+ac+ax (AX36002R)
WiFi Router
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev prpl Foundation Haze
Model Part Number WNC LVRP
FCC ID none specified
Type wireless router
CPU1 checkY Qualcomm IPQ8072A
CPU1 Type ARM Cortex-A53
CPU1 Speed 2.2 GHz ( 4 cores ) 64-bit
Flash1 Chip Brand? Model?
Flash1 Size 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (eMMC)
Flash2 Chip Macronix MX25U6435F
Flash2 Size 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (SPI NOR)
RAM1 Size 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br />
RAM1 Chip Brand? Model?
ETH chip1 Qualcomm IPQ8072A
ETH chip2 Aquantia AQR113C
ETH chip3 Qualcomm Atheros QCA8075
Ethernet Port Count 1-10GbE-WAN
3-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz/an

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types M.2 B-key socket PCIe 3.0, USB 3.0, SFP
Mini PCIe slots 1
USB ports 1
SFP ports 1
M.2 Slots 1
USB Hub Compatible Untested
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)

Flags:
Bluetooth v5.0, WiFi 6

Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 Qualcomm QCN5024
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 1148 Mbps
802.11n up to 600 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm QCN5054
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11a/n/ac/ax
802.11ax up to 2402 Mbps
802.11ac up to 1733 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
Radio 3
Chip1 Qualcomm QCN9074
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11ax
802.11ax up to 2402 Mbps
WiFi Operating Frequency 6 GHz

For a list of all currently documented Aquantia SoC's with specifications, see Aquantia.
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

• 1148 Mbps - 4SS 2.4GHz 802.11ax (40MHz chan.),
• 2402 Mbps - 4SS 5GHz 802.11ax (80MHz chan.) = AX3600 class

Flashing

Flashing OpenWrt

Target: qualcommax
Subtarget: ipq807x
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 24.10.5
LAN Hardware: Qualcomm Atheros QCA8075
LAN Comment: Aquantia AQR113C 10Gbe Phy
WLAN Hardware: Qualcomm QCN5024, Qualcomm QCN5054, Qualcomm QCN9074
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >>
ipq807x: add initial support for prpl Foundation Haze board
Haze is prpl Foundation's reference board (WNC LVRP).

Board info:

 - IPQ8072A SoC
 - 2 GiB RAM
 - 4 GiB eMMC
 - 8MiB SPI NOR (MX25U6435F)

 - 3x 1GigE ports (QCA8075)
 - 1x 10GigE port (AQR113C)
 - 1x SFP cage

 - WiFi 6GHz 160MHz (QCN9074)
 - WiFi 5GHz 80+80MHz (QCN5054)
 - WiFi 2.4G (QCN5024)

 - ARM Standard 20-pin 2.54mm/0.1" JTAG (1V8 !!!)
 - Bluetooth v5.0 + EDR with integrated Class 1 PA (CYW20704)
 - 1x M.2 B-key socket with PCIe 3.0
 - 1x USB 3.0 port
 - UART 4-pin 3V3(arrow),RX,TX,GND (115200 8N1)
 - Reset and WPS buttons

Flashing instructions:

 1. From U-Boot boot OpenWrt using initramfs image:

    IPQ807x# tftpboot openwrt-ipq807x-generic-prpl_haze-initramfs-uImage.itb && bootm

 2. In OpenWrt running from initramfs execute sysupgrade:

    root@OpenWrt:/# sysupgrade -n /tmp/openwrt-ipq807x-generic-prpl_haze-squashfs-sysupgrade.bin

Work in progress/known issues:

 * SFP feature not implemented/tested
 * M.2 feature not implemented/tested
 * Bluetooth feature not implemented/tested
 * 6GHz wireless should be working, but not tested
 * MAC address assigments for LAN interfaces