RPF Raspberry Pi 400
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac (AC600) | |
|---|---|
| Single Board Computer | |
|
| |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Status Unknown |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | RPF Raspberry Pi 400 |
| FCC ID | 2ABCB-RPI400 |
| Type | single-board computer |
| CPU1 | Broadcom BCM2711 |
| CPU1 Type | ARMv8-A Cortex-A72 |
| CPU1 Speed | 2.0 GHz ( 4 cores ) 64-bit |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 0 MiB 0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (SD card) |
| RAM1 Size | 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Broadcom BCM2711 |
| Ethernet Port Count | 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Expansion IF types | USB 2.0, USB 3.0, USB OTG, HDMI |
| USB ports | 3 |
| HDMI | 1 |
| USB Hub Compatible | Untested |
| Power | 5 VDC, 3 A |
| Connector type | USB |
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Radio 1 | |
| Radio1 module | unknown |
| Radio1 module IF | SDIO |
| Chip1 | Cypress CYW43456 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 1x1:1 |
| Wireless Standard | IEEE 802.11a/b/g/n/ac |
| 802.11ac | up to 433 Mbps |
| 802.11n | up to 150/150 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 2.4 or 5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Cypress (Broadcom) chipsets with specifications, see Cypress.
For a list of all currently documented RPF devices with specifications, see RPF.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
OpenWrt Target: bcm27xx
OpenWrt Subtarget: bcm2711
OpenWrt Package architecture: aarch64_cortex-a72
Support started version: 21.02.0
Current supported version: 24.10.2
OpenWrt Subtarget: bcm2711
OpenWrt Package architecture: aarch64_cortex-a72
Support started version: 21.02.0
Current supported version: 24.10.2
WLAN Comment: SDIO connected
Please insert instructions here
Categories:
- RPF
- Embedded system/single-board computer
- Embedded System Broadcom
- Embedded System BCM2711
- Broadcom
- Embedded System ARMv8-A
- Embedded System Cortex-A72
- OpenWrt Supported
- Embedded System Cypress
- Embedded System CYW43456
- Cypress
- Has Mimo Status
- Embedded System IEEE 802.11a/b/g/n/ac
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation