RPF Raspberry Pi 5 16GB
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac (AC600) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Raspberry Pi 5 16GB RAM | |||||||||||||||||
|
| |||||||||||||||||
| Homepage | Product page | ||||||||||||||||
| WikiDevi.wi-cat.ru | RPF Raspberry Pi 5 16GB | ||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||
| OpenWrt | Supported | ||||||||||||||||
| Tomato any flavor | Status Unknown | ||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev | RPF Raspberry Pi 5 (16GB) | ||||||||||||||||
| FCC ID | 2ABCB-RPI5 | ||||||||||||||||
| IC ID | 20953-RPI5 | ||||||||||||||||
| Type | single-board computer | ||||||||||||||||
| CPU1 | Broadcom BCM2712 | ||||||||||||||||
| CPU1 Type | ARM Cortex-A76 | ||||||||||||||||
| CPU1 Speed | 2.4 GHz ( 4 cores ) 64-bit | ||||||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||||||
| Flash1 Size | 0 MiB 0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (microSDXC) | ||||||||||||||||
| RAM1 Size | 16 GiB 16,384 MiB <br />17,179,869,184 B <br />134,217,728 Kib <br />16,777,216 KiB <br />131,072 Mib <br /> (LPDDR4X) | ||||||||||||||||
| RAM1 Chip | Micron MT53E4G32D8CY-046 WT:C | ||||||||||||||||
| ETH chip1 | Broadcom BCM2712 | ||||||||||||||||
| ETH chip2 | Broadcom BCM54213 | ||||||||||||||||
| Ethernet Port Count | 1-1GbE-LAN | ||||||||||||||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||||||||||||||
|
802dot11 OUI: none specified | |||||||||||||||||
| Stock FW OS | Linux 6.6.31 Debian 12 | ||||||||||||||||
| Expansion IF types | PCIe x1, USB 3.0, USB 2.0, Micro SD Card slot, Micro HDM | ||||||||||||||||
| Mini PCIe slots | 1 | ||||||||||||||||
| USB ports | 4 | ||||||||||||||||
| SD/MMC Slots | 1 | ||||||||||||||||
| HDMI | 1 | ||||||||||||||||
| USB Hub Compatible | Untested | ||||||||||||||||
| Power | 5 VDC, 5 A | ||||||||||||||||
| Connector type | USB Female (Type-C) | ||||||||||||||||
| Serial Port (UART) | yes, 3-pin header, populated, (115200 8N1) | ||||||||||||||||
|
Flags: | |||||||||||||||||
|
| |||||||||||||||||
| Other | |||||||||||||||||
|
Default IP address: acquired via DHCP | |||||||||||||||||
| 3rd Party Firmware Support |
Ubuntu , Alpine Linux, Armbian, LibreELEC, Volumio, OpenWrt • (List | Dev | DLs) | ||||||||||||||||
| Retail | |||||||||||||||||
| FCC approval date | 18 October 2023 | ||||||||||||||||
| (Est.) release date | January 2025 | ||||||||||||||||
| (Est.) initial retail price (in USD): | $120 | ||||||||||||||||
| EAN |
5056561803333 (UPC DB, On eBay) | ||||||||||||||||
| ASIN |
B0DSPYPKRG | ||||||||||||||||
| Country of manuf | UK | ||||||||||||||||
| Radio 1 | |||||||||||||||||
| Radio1 module | unknown | ||||||||||||||||
| Radio1 module IF | SDIO 3.0 | ||||||||||||||||
| Chip1 | Cypress (Infineon) CYW43455 | ||||||||||||||||
| Wireless interface OUI | none specified | ||||||||||||||||
| Antenna Connector Type | none (internal) | ||||||||||||||||
| MIMO status | 1x1:1 | ||||||||||||||||
| Wireless Standard | IEEE 802.11a/b/g/n/ac | ||||||||||||||||
| 802.11ac | up to 433 Mbps | ||||||||||||||||
| 802.11n | up to 150 Mbps | ||||||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||||||
| 802.11a | up to 54 Mbps | ||||||||||||||||
| WiFi Operating Frequency | 2.4 or 5 GHz | ||||||||||||||||
| |||||||||||||||||
| |||||||||||||||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Cypress (Broadcom) chipsets with specifications, see Cypress.
For a list of all currently documented RPF devices with specifications, see RPF.
Overview
"Raspberry Pi 5 16GB RAM" is silkscreened near the 40-pin GPIO connector.
See also: RPF Raspberry Pi series
Hardware specification
- CPU: Broadcom BCM2712 @2.4GHz
- SoC: Quad-core ARM (Cortex-A76)
- GPU: Broadcom VideoCore VII
- OpenGL ES 3.1, Vulkan 1.2,
- H.265 (HEVC) (up to 4Kp60 decode),
- H.264 (up to 1080p60 decode, 1080p30 encode)
- Storage: TF card (max.512GB)/MMC card slot
- Memory: 16GB (LPDDR4X) SDRAM
- Wi-Fi: Cypress (Infineon) CYW43455 (1T1R)
- SDIO 3.0: Wi-Fi 802.11ac, UART/PCM: BT 5.0 LE
- Network: 1x 1GbE port
- USB: 2x USB 3.0 (Host), 2x USB 2.0 (Host) ports
- PCIe: PCIe 2.0 x1 via ribbon cable
- GPIO: 1x 40-pin headers
- Power Source: 5V via USB (Type-C) port
Links of Interest
- Raspberry Pi 5 SBC launched with 2.4GHz Broadcom BCM2712 on CNX|Software
- Next-Generation Raspberry Pi 5 on LinuxGizmos
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: bcm27xx
Subtarget: bcm2712
Package architecture: aarch64_cortex-a76
Supported Since Commit
Support started version: 24.10.0
Current supported version: fix
Subtarget: bcm2712
Package architecture: aarch64_cortex-a76
Supported Since Commit
Support started version: 24.10.0
Current supported version: fix
WLAN Hardware: Cypress CYW43455
WLAN Comment: SDIO connected
Installation method(s):
SD card
Recovery method(s):
SD card
WLAN Comment: SDIO connected
Installation method(s):
SD card
Recovery method(s):
SD card
| git • >> |
|---|
bcm27xx: add new bcm2712 subtarget This patch adds support for Raspberry Pi 5. Instead of using 16K pages like Raspberry Pi OS, OpenWrt uses 4K pages due to incompatibilities with F2FS and other applications. There are multiple RPi forum posts with different cases and users are forcing kernel8.img to workaround them, which is the 64 bit kernel of the RPi 4. However, this isn't possible in OpenWrt because we only ship one kernel and we would have to add RPi 5 support to bcm2711 subtarget (RPi 4) for that workaround to work in OpenWrt. Specification: - Processor Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographic extension, 512KB L2 caches per core, 2048KB L3 cache Features: - VideoCore VII GPU, supports OpenGL ES 3.1, Vulkan 1.2 - Dual 4Kp60 HDMI display output with HDR support 4Kp60 HEVC decoder - LPDDR4X-4267 SDRAM 4GB and 8GB - Dual-band 802.11ac Wi-Fi - Bluetooth 5.0 / Bluetooth Low Energy - microSD card slot, with support for SDR104 high-speed mode - 2 x USB 3.0 ports - 2 x USB 2.0 ports - Gigabit Ethernet - 2 x 4 lane MIPI camera/display - PCIe 2.0 x1 - 5V/5A power via USB-C - Raspberry Pi standard 40-pin header - Real-time clock RTC - Power button Build system: x86_64 Build-tested: bcm2712 Run-tested: bcm2712/RPi5 Signed-off-by: Marty Jones [Remove device variant, improve description] Signed-off-by: Álvaro Fernández Rojas |
Categories:
- RPF
- Embedded system/single-board computer
- Embedded System Broadcom
- Embedded System BCM2712
- Broadcom
- Embedded System ARM
- Embedded System Cortex-A76
- Embedded System BCM54213
- OpenWrt Supported
- Embedded System Cypress (Infineon)
- Embedded System CYW43455
- Cypress (Infineon)
- Has Mimo Status
- Embedded System IEEE 802.11a/b/g/n/ac
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation