RaidSonic IB-NAS4220-B
From TechInfoDepot
Jump to navigationJump to search
| Icy Box IB-NAS4220-B | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | RaidSonic IB-NAS4220-B |
| Type | NAS |
CPU1  | Storm SL3516 |
| CPU1 Type | ARM9 |
| CPU1 Speed | 300 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Brand? Model? |
| Ethernet Port Count | 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader | RedBoot |
| Expansion IF types | USB 2.0, SATA |
| USB ports | 2 |
| SATA Ports | 2 |
| USB Hub Compatible | Untested |
| Power | ? VDC, ? A |
| Connector type | 4-pin DIN |
| Serial Port (UART) | yes, (19200 8N1} |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| Availability | End of Life |
For a list of all currently documented Storlink (Storm) SoC's with specifications, see Storlink.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: gemini
Subtarget: generic
Package architecture: arm_fa526
Supported Since Commit
Support started version: 15.05
Current supported version: 25.12.5
Subtarget: generic
Package architecture: arm_fa526
Supported Since Commit
Support started version: 15.05
Current supported version: 25.12.5
WLAN Hardware: none
Installation method(s):
see devicepage
Recovery method(s):
see devicepage
Installation method(s):
see devicepage
Recovery method(s):
see devicepage
| git • >> |
|---|
gemini: add basic nas4220 board support Few notes: - redboot partitions are unusable - redboot declares only 16M of RAM, hence the mem arg in cmdline and separate kernel config - boots fine but only ethernet works for now - split wiliboard and raidsonic boards into different subtargets Signed-off-by: Roman Yeryomin SVN-Revision: 43319 |
