Raspberry Pi Compute Module 3

From TechInfoDepot
Jump to navigationJump to search
Single Board Computer
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Tomato any flavor
Status Unknown
Gargoyle
Status Unknown
Platform
BrandModelRev
RPF Raspberry Pi Compute Module 3
Type
SoM
CPU1 checkY
Broadcom BCM2837
CPU1 Type
ARMv8 Cortex-A53
CPU1 Speed
1.2 GHz ( 4 cores )
Flash1 Chip
Brand? Model?
Flash1 Size
0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (microSDHC)
RAM1 Size
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />
RAM1 Chip
Brand? Model?
Stock bootloader
U-Boot
Expansion IF types
none specified
Power
5.1 VDC, 2.5 A
Serial Port (UART)
yes, 3.3, (115200 8N1)
Other
3rd Party Firmware Support
OpenWrt • (List | Dev | DLs)

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented RPF device with specifications, see RPF.

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: bcm27xx
OpenWrt Subtarget: bcm2710
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: 19.07.0
Current supported version: 24.10.0


Comment:
The bandwidth of ethernet port is shared with USB (4 USB ports and ethernet are shared on 1 usb controller)

The bootloader is an image on MicroSD Card (the data partition can be resized to provide more storage), you may need to boot up Raspbian (released in or after April 2018) and set up WiFi country-code first before install OpenWrt

Please insert instructions here