ReadyNet WRT150N
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |
---|---|
wireless router | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
ReadyNet WRT150N |
FCC ID | |
Type |
wireless router |
CPU1 |
Ralink Model? |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
? MiB |
RAM1 Size |
? MiB |
RAM1 Chip |
EtronTech EM638165TS-6G |
ETH chip1 |
Ralink Model? |
Switch |
Ralink Model? |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Expansion IF types |
none specified |
Power |
5 VDC, 1 A |
Connector type |
barrel |
Other | |
Default IP address: 192.168.2.1 | |
Manuf/OEM/ODM |
Shenzhen MTN Electronics MT-SA-WA752 |
Retail | |
FCC approval date | 09 October 2012 |
Country of manuf | China |
Radio 1 | |
Chip1 |
Ralink Model? |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
1x1:1 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 150 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"MT-SA-WA752-V1.0" is silkscreened on the board in the FCC photos.
This device may use RT3050.
Default credentials are from the FCC submitted manual. The SSID shown in the router screenshots and states as the default in the FCC manual is WR752N_AP (no entries on WiGLE as of 10/10/2012).