Ruckus Wireless ZoneFlex 7372-E

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn (AN600)
ZoneFlex 7372-E 802.11n Multimedia Wi-Fi Access Point
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Ruckus Wireless ZoneFlex 7372-E
FCC ID
IC ID
Type
access point
CPU1
CPU1 Type
MIPS 74Kc
CPU1 Speed
560 MHz 32-bit
Flash1 Chip
Spansion Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Nanya Model? x 2
ETH chip1
ETH chip2
Atheros Model?
Ethernet Port Count
2-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: 8C:0C:90 (2 E, 2 W)
Ethernet OUI: 8C:0C:90 (2 E, 2 W)

Expansion IF types
none specified
PoE
802.3af, standard
Power
12 VDC, 1 A
Connector type
barrel
Other

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 799 additional devices
of which 17 are Ruckus Wireless devices
Default login user: super
Default login password: sp-admin
super:sp-admin credentials used by 16 additional devices
of which 16 are Ruckus Wireless devices

Retail
FCC approval date 01 May 2013
ASIN B00EZWUGOO Flag of the United States.svg
multiple uses
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
8C:0C:90
Antenna Connector Type
U.FL, RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
Atheros Model?
Wireless interface OUI
8C:0C:90
Antenna Connector Type
U.FL, RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/n
802.11n
up to 300 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Ruckus Wireless ZoneFlex 7372AtherosAtherosAtheros
Ruckus Wireless ZoneFlex 7372-EAtherosAtherosAtheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Ruckus Wireless device with specifications, see Ruckus Wireless.

300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

  • "ST. BERNARD" and the Ruckus Wireless (barking dog) logo is
silkscreened on the non-SoC side of the board in the FCC photos.
"ASM 120-11214-001 REV A .0" appears to be silkscreened on the other side of the board.
"FAB 100-10105-001 REV A" is on the other side of the board.
  • The device would seem to be using an AR934x SoC (AR9344?) and
an additional AR93xx (AR9382/AR9582 or AR9392/AR9592) radio.

1x 10/100/1000 port (PoE), 1x 10/100 port

  • Default settings are per the FCC label.
The FCC QSG specifies the default SSIDs as..
  • Wireless1 through Wireless8 (2.4GHz radio)
  • Wireless9 through Wireless16 (5GHz radio)

Per MAC labels affixed to the FCC EUT (internal and label), the device

is presumed to use (at least) a 8C:0C:90 (Ruckus Wireless) OUI.

Links of Interest