Ruckus Wireless ZoneFlex 7762-S
| abgn (AN600) | |
|---|---|
| Outdoor 802.11n Sector AP | |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | Ruckus Wireless ZoneFlex 7762-S |
| FCC ID | S9G-ZF7762X, U2M-ZF7762 |
| IC ID | 5912A-ZF7762X |
| Type | access point |
| CPU1 | Atheros AR7161 |
| CPU1 Type | MIPS 24K |
| CPU1 Speed | 680 MHz 32-bit |
| Flash1 Chip | STMicro 25P28V6P |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | ? MiB |
| RAM1 Chip | Micron Model? x 2 |
| ETH chip1 | Atheros AR7161 |
| ETH chip2 | Marvell Model? |
| ETH chip3 | Marvell Model? |
| Ethernet Port Count | 2-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Expansion IF types | none specified |
| PoE | 802.3at, standard |
| Power | 12 VDC, ? A |
| Connector type | unknown |
|
| |
|
Additional chips | |
| Other | |
|
Default IP address: 192.168.0.1 | |
| Manuf/OEM/ODM | Senao |
| Retail | |
| FCC approval date | 05 October 2010 |
| ASIN |
B00006FXN9 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 | Atheros AR9160 |
| Chip2 | Atheros Model? |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL |
| MIMO status | 3x3:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | Atheros AR9160 |
| Chip2 | Atheros Model? |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11a/n |
| 802.11n | up to 300 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Ruckus Wireless devices with specifications, see Ruckus Wireless.
Overview
- Smart antenna for 2.4GHz (12 elements), external antennas for 5GHz
The Ruckus Wireless logo, "Giterdone 10", "Asm 120-11132-[ ] Rev [ ]", and "ROHS COMPLIANT" is silkscreened on the board in the FCC photos.
- "FAB 100-11132-001 REV A" is on the back of the board.
The device has two Ethernet interfaces - one is Gigabit.
- PoE input w/ the 10/100/1000 port, PoE output (802.3af) w/ the 10/100 port
The FCC docs show the device with..
- an Atheros AR7161-BC1A SoC
- a STMicroelectronics 25P28V6P SPI Flash
- two Micron RAM chips
- one Marvell GbE PHY
- one Marvell FE PHY
- two Atheros MAC/BBs w/ accompanying RF chips (presumed to be AR9160+AR910x)
The docs for U2M-ZF7762 (ZoneFlex 7762 AP) were filed 08/24/2009.
The FCC manual specifies the default SSID format as WirelessX (where X is a number between 1 and 8, 8 WLANs)
- Ruckus Wireless
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR7161
- Atheros
- Embedded System MIPS 24K
- Embedded System
- Embedded System Marvell
- Marvell
- Manuf Senao
- Embedded System AR9160
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation