SAPIDO RB-1232
| bgn (N300) | |
|---|---|
| N+ Broadband Router - All Broadbands | |
|  | |
| WikiDevi.wi-cat.ru | SAPIDO RB-1232 | 
| 3rd Party Firmware | |
| dd-wrt | Status Unknown | 
| OpenWrt | Status Unknown | 
| Tomato any flavor | Incompatible | 
| Platform | |
| Brand • Model • Rev | SAPIDO RB-1232 | 
| FCC ID | none specified | 
| Type | wireless router | 
| CPU1  | Realtek RTL8196BU | 
| CPU1 Type | Lexra RLX | 
| CPU1 Speed | 390 MHz | 
| Flash1 Chip | Macronix MX25L6445EM2I-10G | 
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | 
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | 
| RAM1 Chip | ESMT M12L2561616A-6T | 
| ETH chip1 | Realtek RTL8196BU | 
| Switch | Realtek RTL8196BU | 
| Ethernet Port Count | 1-100MbE-WAN 4-100MbE-LAN | 
| Wired Standard | IEEE 802.3i/3u | 
| Stock bootloader | rtkload | 
| Stock FW OS | Linux | 
| Expansion IF types | USB 2.0 | 
| USB ports | 1 | 
| USB Hub Compatible | Untested | 
| Power | 5 VDC, 1.5 A | 
| Connector type | barrel | 
| Serial Port (UART) | yes, internal, 4-pin header, unpopulated, 3.3V TTL, (38400 8N1) | 
| JTAG Port | yes | 
|  | |
|  | |
| Other | |
| Default SSID: SAPIDO_All_Broadband_Router  | |
| Manuf/OEM/ODM | E-TOP BR380n v3 <??> | 
| Retail | |
| (Est.) release date | April 2010 | 
| Country of manuf | Taiwan | 
| Radio 1 | |
| Chip1 | Realtek RTL8192SE | 
| Wireless interface OUI | 00:D0:41 | 
| Antenna Connector Type | RP-SMA | 
| MIMO status | 2x2:2 | 
| Wireless Standard | IEEE 802.11b/g/n | 
| 802.11n | up to 300 Mbps | 
| 802.11g | up to 54 Mbps | 
| 802.11b | up to 11 Mbps | 
| WiFi Operating Frequency | 2.4 GHz | 
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
There appears to be a v1 and v2 of this device. I don't know what the difference between versions is..
"EPMBBR380NBXX3XX", "BR380n_MB_V30", and a date code of 1030 is silkscreened on the board of the particular unit populating this entry.
The default SSID of the wireless interface is SAPIDO_All_Broadband_Router. The default Universal Repeater Mode SSID is ESSID_SAPIDO_RB-1232. The default SSIDs for multi-SSID mode are Multiple_APX, where X is 1 through 4.
JTAG-Serial Info
Serial
Serial Pinouts
The pinout would appear to be the following...
T1 [3.3] (TxD) (RxD) (GND)
Boot log
========== SPI ============= ---RealTek(RTL8196BU)at 2010.03.19-14:01+0800 version v1.4 [16bit](390MHz) Jump to image start=0x80500000... init started: BusyBox v1.8.2 (2010-08-20 09:42:30 CST) 693 HW configuration check OK! DS configuration check OK! CS configuration check OK! BR380n cat: can't open '/var/run/hsdpa.pid': No such file or directory cat: can't open '/var/run/hsdpadial.pid': No such file or directory You need to specify whom to kill You need to specify whom to kill Initialize wlan0 interface Initialize wlan0-va0 interface Initialize wlan0-va1 interface Initialize wlan0-va2 interface Initialize wlan0-va3 interface Setup BRIDGE interface cat: can't open '/etc/udhcpc/udhcpc-eth5.pid': No such file or directory [: 0: unknown operand killall: syslogd: no process killed killall: klogd: no process killed ifconfig: SIOCGIFFLAGS: No such device bridge br0 doesn't exist; can't delete it Setup bridge... ======buf_cache: add@/class/net/br0 route: SIOCDELRT: No such process route: SIOCDELRT: No such process route: SIOCDELRT: No such process route: SIOCDELRT: No such process route: SIOCDELRT: No such process route: SIOCDELRT: No such process WiFi Simple Config v1.14 (2010.08.20-01:43+0000). route: SIOCDELRT: No such process IEEE 802.11f (IAPP) using interface br0 (v1.7) Setup WAN interface killall: webs: no process killed <init.sh> User select WAN Type order is <1> killall: Autodetect: no process killed To start miniigd MiniIGD v1.07 (2010.08.20-01:44+0000). <init.sh> WAN Type is Ethernet, Wireless select WPS or WDS Mode ====== init.sh END ======= 2056 2057 2058 Password: Set web language to English
Notes
Included PSU(s)
The included power adapter for at least some units is a Channel Well Technology CAP008051.
| Channel Well Technology CAP008051 (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC ~ 47-63 Hz, 0.25 A | |||||
| Input connector: NEMA 1-15P Style: medium, horiz. Eff. level: 5 | |||||
| Output: 5 VDC, 1.5 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||
- SAPIDO
- Embedded system/wireless router
- Embedded System Realtek
- Embedded System RTL8196BU
- Realtek
- Embedded System Lexra RLX
- Embedded System
- Manuf E-TOP
- Embedded System RTL8192SE
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation



