SAPIDO RB-1232/Serial info

Boot log

========== SPI =============

---RealTek(RTL8196BU)at 2010.03.19-14:01+0800 version v1.4 [16bit](390MHz)
Jump to image start=0x80500000...
init started: BusyBox v1.8.2 (2010-08-20 09:42:30 CST)
693
HW configuration check OK!
DS configuration check OK!
CS configuration check OK!
BR380n
cat: can't open '/var/run/hsdpa.pid': No such file or directory
cat: can't open '/var/run/hsdpadial.pid': No such file or directory
You need to specify whom to kill
You need to specify whom to kill
Initialize wlan0 interface
Initialize wlan0-va0 interface
Initialize wlan0-va1 interface
Initialize wlan0-va2 interface
Initialize wlan0-va3 interface
Setup BRIDGE interface
cat: can't open '/etc/udhcpc/udhcpc-eth5.pid': No such file or directory
[: 0: unknown operand
killall: syslogd: no process killed
killall: klogd: no process killed
ifconfig: SIOCGIFFLAGS: No such device
bridge br0 doesn't exist; can't delete it
Setup bridge...
======buf_cache: add@/class/net/br0
route: SIOCDELRT: No such process
route: SIOCDELRT: No such process
route: SIOCDELRT: No such process
route: SIOCDELRT: No such process
route: SIOCDELRT: No such process
route: SIOCDELRT: No such process

WiFi Simple Config v1.14 (2010.08.20-01:43+0000).

route: SIOCDELRT: No such process
IEEE 802.11f (IAPP) using interface br0 (v1.7)
Setup WAN interface
killall: webs: no process killed
<init.sh> User select WAN Type order is <1>
killall: Autodetect: no process killed
To start miniigd

MiniIGD v1.07 (2010.08.20-01:44+0000).

<init.sh> WAN Type is Ethernet, Wireless select WPS or WDS Mode
====== init.sh END =======
2056
2057
2058
Password: Set web language to English