NAG SNR-CPE-ME1

From TechInfoDepot
(Redirected from SNR CPE-ME1)
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC750)
AC750 Wireless Dual Band Gigabit Router
SNR-CPE-ME1.png
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
NAG SNR-CPE-ME1
FCC ID
none specified
Type
wireless router, CPE
CPU1
CPU1 Type
MIPS 1004Kc
CPU1 Speed
880 MHz ( 2 cores ) 16-bit
Flash1 Chip
GigaDevice GD25Q128CSIG
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3)
RAM1 Chip
Brand? Model?
ETH chip1
Switch
Ethernet Port Count
1-1GbE-WAN
4-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: F8:F0:82 (4 E, 4 W)
Ethernet OUI: F8:F0:82 (4 E, 4 W)

Stock bootloader
U-Boot
Stock FW OS
Linux 3.4.113 Wive-NG-MT
Expansion IF types
USB 3.0
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 2 A
Connector type
barrel

Additional chips
2.4GHz RF Power Amplifier IC;Skyworks (SiGe);SE2576L;;2;
5GHz RF Power Amplifier IC;Skyworks (SiGe);SE5003L;;1;

Other

Default SSID: Wive-NG-MT (2 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1324 additional devices
of which 4 are NAG devices
Default login user: Admin
Default login password: Admin
Admin:Admin credentials used by 16 additional devices
of which 4 are NAG devices

3rd Party Firmware Support
Retail
(Est.) release date May 2017
Country of manuf China
Radio 1
Chip1
MediaTek MT7603EN
Wireless interface OUI
F8:F0:82
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
MediaTek MT7610EN
Wireless interface OUI
F8:F0:82
Antenna Connector Type
none specified
MIMO status
1x1:1
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 433 Mbps
802.11n
up to 150 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
NAG SNR-CPE-MD1MediaTekMediaTekMediaTek
NAG SNR-CPE-ME1MediaTekMediaTekMediaTek
NAG SNR-CPE-ME2-LiteMediaTekMediaTekMediaTek
NAG SNR-CPE-ME2-SFPMediaTekMediaTekMediaTek
NAG SNR-CPE-W4NRalinkRalink
NAG SNR-CPE-W4N (rev.M)MediaTekMediaTek
NAG SNR-CPE-W4N-3GRalinkRalink

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

433 Mbps - 1SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC750 class

Overview

Future support available with Wive-NG (sfstudio) • (Blog | List)

Wive-NG-MT on Wi-CAT (RU)

The bootloader used is assumed to be U-Boot.

Default SSIDs Wive-NG-MT.

Specifications

SNR-CPE-ME1 on Wi-CAT (RU)
PA: Skyworks (SiGe) SE2576L / SE5003L (?)
20dBm (100mW)/2.4GHz, 23dBm (200mW)/5GHz
  • WAN: 1x GbE, LAN: 4x GbE ports
  • USB: 1x USB 3.0 (power off/on)
supports Entware (Flash/HDD),
3G/4G modem (RAS/NDIS)

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 23.05.0
Current supported version: 23.05.5

Please insert instructions here

See also

List of Wive-ng firmware supported devices
CPU: MediaTek MT7620N (2T2R 802.11bgn), ESMT
BL-RM7620N-V1.2 • PCB image