Sagemcom F@ST 1704N

multiple revisions of this device, use caution

bgn (N150)
wireless router,dsl modem
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Status Unknown
Platform
Brand • Model • Rev	Sagemcom F@ST 1704N
FCC ID	VW3FAST1704N
IC ID	9140A-FAST1704N
Type	wireless router, dsl modem
CPU1	Broadcom BCM6318
CPU1 Type	BMIPS3300
CPU1 Speed	333 MHz
Flash1 Chip	Macronix MX25L6406E
Flash1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	EtronTech EM6AB160TSD
ETH chip1	Broadcom BCM6318
Switch	Broadcom BCM6318
Ethernet Port Count	4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 68:15:90 (1 E, 1 W) Ethernet OUI: 68:15:90 (1 E, 1 W)
Stock bootloader	CFE 7.232
Stock FW OS	Linux 2.6.30
Expansion IF types	none specified
Power	12 VDC, 0.5 A
Connector type	barrel
Flags: ADSL2+
Additional chips ADSL AFE;Broadcom;BCM6301KSG;;1;
Other
Manuf/OEM/ODM	SGE GAN5.PT168A-B REV1.0
Retail
End of Life date	13 November 2012
Country of manuf	China
Radio 1
Chip1	Broadcom BCM43131
Wireless interface OUI	68:15:90
Antenna Connector Type	none specified
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
FCC ID Sagemcom F@ST 2804 V7 VW3FAST1704N
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Sagemcom F@ST 1704 Broadcom Broadcom Sagemcom F@ST 1704N Broadcom Broadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Sagemcom device with specifications, see Sagemcom.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"GAN5.PT168A-B" and "REV1.0" appears to be silkscreened on the board in the FCC photos.

This device probably uses BCM6318 and BCM43131.

OEM: SGE (T&W)

See also: Sagemcom F@ST 2804 V7 and Sagemcom

Links of Interest

• Sagemcom F@ST 2804 V7 rev1 (1704N) on Zepete LJ

JTAG-Serial Info

Serial

Boot log • >>

CFE version 7.232 for BCM96318 (32bit,SP,BE) Build Date: Tue Jul 30 10:10:48 CST 2013 (laixinliu@SZ01007.DONGGUAN.CN) Copyright (C) 2005-2012 SAGEMCOM Corporation. HS Serial flash device: name MX25L64, id 0xc217 size 8192KB Total Flash size: 8192K with 2048 sectors Chip ID: BCM6318B0, MIPS: 333MHz, DDR: 333MHz, Bus: 166MHz Main Thread: TP0 Total Memory: 67108864 bytes (64MB) Boot Address: 0xb8000000 Board IP address : 192.168.1.1:ffffff00 Host IP address : 192.168.1.100 Gateway IP address : Run from flash/host (f/h) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 1 Board Id (0-5) : F@ST1704N Number of MAC Addresses (1-32) : 11 Base MAC Address : 68:15:90:ea:9b:46 PSI Size (1-64) KBytes : 40 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 0 Main Thread Number [0|1] : 0 *** Press any key to stop auto run (1 seconds) *** Auto run second count down: 1�1�0 Booting from only image (0xb8010000) ... Code Address: 0x80010000, Entry Address: 0x802f9780 Decompression OK! Entry at 0x802f9780 Closing network. Disabling Switch ports. Flushing Receive Buffers... 0 buffers found. Closing DMA Channels. Starting program at 0x802f9780 Linux version 2.6.30 (bensonli@sz01017.ads.local) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #1 Wed Sep 18 18:54:02 CST 2013 HS Serial flash device: name MX25L64, id 0xc217 size 8192KB F@ST1704N prom init CPU revision is: 00029033 (Broadcom BCM3302) DSL SDRAM reserved: 0x100000 Determined physical RAM map: memory: 03f00000 @ 00000000 (usable) Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00003f00 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00003f00 On node 0 totalpages: 16128 free_area_init_node: node 0, pgdat 80391130, node_mem_map 81000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 94 pages used for memmap Normal zone: 11938 pages, LIFO batch:1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16002 Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200 Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes NR_IRQS:128 PID hash table entries: 256 (order: 8, 1024 bytes) console [ttyS0] enabled Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 59908k/64512k available (3006k kernel code, 4584k reserved, 586k data, 136k init, 0k highmem) Calibrating delay loop... 331.77 BogoMIPS (lpj=165888) Mount-cache hash table entries: 512 --Kernel Config-- SMP=0 PREEMPT=0 DEBUG_SPINLOCK=0 DEBUG_MUTEXES=0